FORD EEC-V • 216K

Ford EEC-V
Calibration Definition

Professional calibration definition • Version 1.0

A large Ford EEC-V 216K calibration definition containing nearly 1,600 manually mapped and checked parameters. Built as a reference for tuning, calibration development, definition creation, binary analysis and reverse engineering.

Buy Definition - $600
~1,600 Mapped Parameters
216K EEC-V Platform
100% Manually Mapped & Checked
1000s Hours of Research

THE DEFINITION

Built From the Ground Up

The Ford EEC-V 216K platform contains a substantial amount of calibration and control data spread throughout the PCM firmware. Finding, identifying and correctly interpreting that information from scratch can take an enormous amount of time.

This definition contains nearly 1,600 mapped calibration parameters organized into useful categories. The definition includes scalars, tables, switches, constants, parameters and other identified calibration data.

The mapping was built through manual research and reverse engineering of EEC-V 216K firmware. Parameters are located, analyzed and checked rather than simply being generated from an automated address scan.

Thousands of hours of research and development have gone into understanding Ford calibration structures, locating calibration data, identifying parameters, checking addresses and building this definition into a practical foundation for further work.

Nearly 1,600 Mapped Parameters

A large collection of identified EEC-V 216K calibration locations gives you a substantial head start when working with compatible Ford PCM binaries.

Manually Mapped

Parameters have been manually located, analyzed and checked. The goal is useful, accurate calibration information rather than simply generating thousands of automatically detected addresses.

Calibration Data

Built for Definition Creation

The mapped information can be used as the foundation for creating your own XDF, DAMOS, A2L-style definition, WinOLS project or another calibration format supported by your workflow.

Reverse Engineering

Use the mapped information while analyzing EEC-V firmware, following code references, identifying calibration structures and understanding how the PCM is organized.

More Than Just Addresses

Where identified, the definition includes useful information such as parameter names, data types, dimensions, conversions, scaling and other calibration details.

USE THE DATA YOUR WAY

Not Locked to One Tuning Tool

The definition is provided as calibration data and reference information rather than being locked to one specific tuning application. Use the mapped information to build or work with the format that makes sense for your project.

TunerPro Create or use an XDF based on the mapped EEC-V calibration data.
WinOLS Use mapped locations and parameter information while building a calibration project.
IDA Pro Reference calibration locations while analyzing code and firmware relationships.
Ghidra Use the mapped calibration information alongside Green Oak disassembly and reverse engineering.
Other Tools Use the information as a reference with other compatible tuning and reverse-engineering software.
Need a finished definition?
If you do not want to build the definition yourself, a finished XDF or DAMOS/A2L-style definition may also be available for an additional charge. Contact Trent's Tuning with your preferred software and requirements for pricing.

COMPATIBILITY

Supported ECU Strategies

Any Ford vehicle and calibration strategy using the EEC-V 216K PCM platform is supported. The definition is not limited to a fixed list of strategy IDs.

All EEC-V 216K Strategies If a EEC-V 216K binary is not already mapped in the supplied definition, Trent's Tuning can reference the binary and set up the required strategy mapping. This allows additional EEC-V 216K vehicles, model years, engine combinations and strategy revisions to be supported without requiring every strategy to be individually listed here.
Binary Based Support In short: if it is a EEC-V 216K calibration, send the binary. The strategy can be identified, referenced and mapped as needed.

DEFINITION PREVIEW

What's Included

Browse the categories and parameters included in the definition. This public preview shows the category, manufacturer parameter name and readable name while keeping the underlying calibration data private.

Loading...

A/C Compressor Control

2 parameters
Manufacturer Name Name
ACPRES_SH AC Head Pressure Level Inhibits Clutch
ACPRES_CL AC Head Pressure Level Restores Clutch

Accelerator Pump

7 parameters
Manufacturer Name Name
DPS_FK_IN Accelerator Pump Filter For Tip In
DPS_FK_OUT Accelerator Pump Filter For Tip Out
DPS_GP Accelerator Pump Multiplier For Tip In
DPS_GN Accelerator Pump Multiplier For Tip Out
DPS_POS Accelerator Pump Tip In Threshold
DPS_NEG Accelerator Pump Tip Out Threshold
FN123D Pump Shot Gain With Coolant Temp

Adaptive Fuel Trim

24 parameters
Manufacturer Name Name
FADPT_SW Fuel Adaptation Switch
FN1325A Adaptive Fuel Table
FN1325A Adaptive Fuel Table AM
FN1325A Adaptive Fuel Table Load
AFACT2 Highest Adaptation ACT Allowed During Adaptation
AFECT2 Highest Adaptation ECT Allowed During Adaptation
AFACT1 Lowest Adaptation ACT Allowed During Adaptation
AFECT1 Lowest Adaptation ECT Allowed During Adaptation
ADAPT_SEL Adaptive Select Switch
FN1327A Adaptive-injector Mapping
ADAPTM ADAPTM
ADEFTR Adaptive Fuel Error Trim
MAXADP Adaptive Compensation Max Allowed Learned
MINADP Adaptive Compensation Min Allowed Learned
DELAMB Dead Band To Not Adapt
ADPTP Max Tp Allowed During Adaptation
VECT3 Min ECT During Adaptation
ADPLOD Min Engine Load Allowed During Adaptation
KWUCNT Number Of Warm Up Counters For Fast Adaptation
KAM_NO_RESET Switch To Shut Off Kam Fuel Reset
VECT5 Warm Up Temperature During Adaptation After Beginning
FN070D Xnorm Adaptive Learning 01
FN041 Ynorm Fuel Adaptive Table Am
FN021A Ynorm Fuel Adaptive Table Load

Auto Trans Diagnostics

12 parameters
Manufacturer Name Name
TCC_CKT_UP Converter Solenoid Circuit Test Up Counter
TCC_EO_LVL Converter Solenoid Open Test Limit
P1746UP P1746 Fault Up Counter
SS_CKT_UP Shift Solenoid Circuit Test Up Counter
SS_EO_LVL Shift Solenoid Open Test Limit
TOT_ERRP_LVL TOT Circuit Fault Limit
TOT_EOP_LVL TOT Circuit Fault Limit Engine Off
TRNS_EO_LVL Trans Engine On Level
TRS_EOW_LVL Transmission Range Sensor Engine Off Deviation Level
TRS_ERRW_LVL Transmission Range Sensor Deviation Level
TRS_TRNS_LVL Transmission Range Sensor Trans Error Level
VFS1_BAT_UP VFS 1 Short To Power Up Counter

Axle & Tire Setup

5 parameters
Manufacturer Name Name
RT_AXLE Axle Ratio
AXLE_RATIO_I Axle Ratio Integer Value
NOV_VID_SW Axle Ratio Switch
TIRE_REV Tire Revs Per Mile
AXLE_RATIO_F Traction Control Switch

Charging System

4 parameters
Manufacturer Name Name
FN821 Idle RPM Using Low Voltage Level Duration
IS_BATV_DR Max Battery Idle Speed Clamp Drive
LOWVOL_CH Voltage Threshold For Charging System Healthy State
LOWVOL_SL Voltage Threshold For Low Charging State

Checksum / Cal ID

1 parameters
Manufacturer Name Name
ROM_TO Checksum Equalizer

Chronometric Update Control

7 parameters
Manufacturer Name Name
SPK_DTS_LIM Clock Tics To Update Ignition Timing Less Often
SPK_DEG_DIF Difference To Update Ignition Timing Less Often
N_PIP_SKIP Number Of PIPs To Skip In Less Frequent Mode
FULPIPALT_DT PIP To Change To Half Fueling Updates
FULPIPMEG_DT PIP To Change To Less Frequent Fuel Updates
MEGAPIP_H_DT PIP To Return To Half Fueling
ALTPIP_H_DT PIP To Return To Normal Fueling

Closed-Loop Fuel Control

17 parameters
Manufacturer Name Name
JUMP_FRAC Quantity Of Fraction To Jump To
AMP_MULT Amplitude Multiplier
HOLD_TM_PCTA Fraction Of Learned Delay Used
LAM_MOD_MAX Max Cal Of Fuel Modulation
DYN_LMAX_LL Max Cal Of Short Term Trim
MAX_ROA_L Max Cal Of Short Term Fuel Trim Lean Direction
MAX_ROA_R Max Cal Of Short Term Fuel Trim Rich Direction
LAM_MOD_MIN Min Cal Of Fuel Modulation
DYN_LMIN_UL Min Cal Of Short Term Trim
JUMP_MULT Multiplier Of Fraction To Jump To
FN1352 Peak To Peak Amplitude For Feedback
PTPAMP_FK Peak To Peak Filter Constant
PTPERROR_MAX Peak To Peak Max Error Allowed
PTPERROR_MIN Peak To Peak Min Error Allowed
RR_MULT_GAIN Proportional Gain Cal Multiplier
FN039 Xnorm Feedback Fuel Control 01
FN021 Ynorm Feedback Fuel Control 01

Cranking Fuel Control

16 parameters
Manufacturer Name Name
FN052C Cylinder Air Charge During Crank
FNCRKMUL_FAR Crank Fuel Multiplier With Time FAR
FN884 Crank ISC Duty Cycle
FNCRK_LAMS Crank Lambda
FN2500 Cranking Ignition Timing
CRK_PIP_ECT CRK Profile Ignition Pickup ECT
CRK_ECT1 Low ECT Boundary For Sequential Electronic Fuel Injection Fuel During Crank
FN384A RPM To Exit Crank Mode
FN755 Ignition Timing When Exiting Crank
CRK_SEFI_SW Switch To Sequential Electronic Fuel Injection Fuel During Crank
FN385A Underspeed To Run RPM
CRK_ECT2 High Side ECT Boundary For Sequential Electronic Fuel Injection Fuel During Crank
FN024H Xnorm Crank Fueling 02
FN023T Xnorm Crank Fueling 04
FN020E Ynorm Crank Fueling 02
FN024T Ynorm Crank Fuel 03

Cruise Control / Misc Controls

1 parameters
Manufacturer Name Name
K_CONV K CONV

DTC Codes / Misc Controls

129 parameters
Manufacturer Name Name
ACT_FMEM ACT Cal If Sensor Is Determined Bad
ALT_CAL_DIST ALT CAL DIST
BPMAX Baro Pressure Level Max
BPMIN Baro Pressure Level Min
MIL_SW Check Engine Light Sw
XTALHPS Clock Speed
P0054SW Code P0054 Switch
P0060SW Code P0060 Switch
P0068SW Code P0068 Switch
P0103SW Code P0103 Switch
P0108SW Code P0108 Switch
P0128SW Code P0128 Switch
P0138SW Code P0138 Switch
P0141SW Code P0141 Switch
P0148SW Code P0148 Switch
P0148_LVL Code P0148 Limit
P0155SW Code P0155 Switch
P0158SW Code P0158 Switch
P0161SW Code P0161 Switch
P0171SW Code P0171 Switch
P0172SW Code P0172 Switch
P0174SW Code P0174 Switch
P0175SW Code P0175 Switch
P0190SW Code P0190 Switch
P0191SW Code P0191 Switch
P0192SW Code P0192 Switch
P0193SW Code P0193 Switch
P0201SW Code P0201 Switch
P0202SW Code P0202 Switch
P0203SW Code P0203 Switch
P0204SW Code P0204 Switch
P0205SW Code P0205 Switch
P0206SW Code P0206 Switch
P0207SW Code P0207 Switch
P0208SW Code P0208 Switch
P0209SW Code P0209 Switch
P0210SW Code P0210 Switch
P0232SW Code P0232 Switch
P0300SW Code P0300 Switch
P0301SW Code P0301 Switch
P0302SW Code P0302 Switch
P0303SW Code P0303 Switch
P0304SW Code P0304 Switch
P0305SW Code P0305 Switch
P0306SW Code P0306 Switch
P0307SW Code P0307 Switch
P0308SW Code P0308 Switch
P0315SW Code P0315 Switch
P0316SW Code P0316 Switch
P0340SW Code P0340 Switch
P0401SW Code P0401 Switch
P0402SW Code P0402 Switch
P0403SW Code P0403 Switch
P0405SW Code P0405 Switch
P0406SW Code P0406 Switch
P0420SW Code P0420 Switch
P0430SW Code P0430 Switch
P0442SW Code P0442 Switch
P0443SW Code P0443 Switch
P0446SW Code P0446 Switch
P0452SW Code P0452 Switch
P0453SW Code P0453 Switch
P0454SW Code P0454 Switch
P0455SW Code P0455 Switch
P0456SW Code P0456 Switch
P0457SW Code P0457 Switch
P0460SW Code P0460 Switch
P0461SW Code P0461 Switch
P0462SW Code P0462 Switch
P0463SW Code P0463 Switch
P0480SW Code P0480 Switch
P0481SW Code P0481 Switch
P0500SW Code P0500 Switch
P0602SW Code P0602 Switch
P0605SW Code P0605 Switch
P0606SW Code P0606 Switch
P0707SW Code P0707 Switch
P0708SW Code P0708 Switch
P0713SW Code P0713 Switch
P0722SW Code P0722 Switch
P1000SW Code P1000 Switch
P1233SW Code P1233 Switch
P1237SW Code P1237 Switch
P1260SW Code P1260 Switch
P1270SW Code P1270 Switch
P1502SW Code P1502 Switch
P1633SW Code P1633 Switch
P1635SW Code P1635 Switch
P1639SW Code P1639 Switch
P1702SW Code P1702 Switch
P1703SW Code P1703 Switch
P1705SW Code P1705 Switch
P1711SW Code P1711 Switch
P1729SW Code P1729 Switch
P2008SW Code P2008 Switch
P2014SW Code P2014 Switch
P2096SW Code P2096 Switch
P2097SW Code P2097 Switch
P2098SW Code P2098 Switch
P2099SW Code P2099 Switch
P2195SW Code P2195 Switch
P2197SW Code P2197 Switch
SARCHG Engine Displacement
VSS_ERR_LVL Deviation Limit For P0500
IMSC_CNT_LVL Deviation Limit For P1519
TCVSR Filter For Vehicle Acceleration Rate Command
TCVST Filter For VSS For Transmission
INJ_FAIL_CNT Injector Fail Count Set High
EPTMAX Max EPT Counts For Failure
EVPMAX Max EVP Counts For Failure
OSS_ERR_UP OSS Deviation Up Counter
P0112SW P0112 SW
P0113SW P0113 SW
PDL_EOW_LVL P0708 Engine Off Limit
PDL_W_LVL P0708 Engine Running Limit
PDL_W_UP P0708 Up Counter
TRS_ERRW_UP P0708 Up Counter 1
PUL_PER_GAL Pulses Per Gallon Conversion Factor
DISFMEM_DSRD Sw To Take Fault Action On DIS Fault
MISFMEM_DSRD Sw To Take Fault Action On Misifre
FMDTM Duration Delay To Turn Check Engine Light
WOTCOT Duration Inhibit AC At Wide Open Throttle
CHT_ER_TM Duration For CHT Fault To Set Code
FNECTWUT Duration For Warm Up
ACTP_SH TP Above Inhibits AC At Wide Open Throttle
ACTP_CL TP Below To Permit AC After Wide Open Throttle
DELTA TP For PT
FN513 TP For WOT
FN654S Warm Up Duration

Decel Fuel Cutoff (DFCO)

17 parameters
Manufacturer Name Name
DFSRPM_PC DFSRPM PC
DFLOD Max Engine Load To Enter
DFS_PRV_N Max RPM To Permit Hysteresis
DFSECT Min Coolant For Fuel Shutoff
DFSECT_PC Min Coolant For Fuel Shutoff In Profile Corr
DFNOVS Min N/V Allowed For Fuel Shut Off
DFSRPM Min RPM To Enter
DFSVS Min VSS To Enter
NDFSO Neutral Deceleration Fuel Shutoff Selection Flag
DFSRPM_CL RPM Below To Turn Fuel On
DFS_PRV_SW Switch To Permit Hysteresis
DFSO_PC_SW Switch To Set To Zero
CTDFSO Duration At Closed Throttle To Enter
CTEDSO Duration At Closed Throttle To Enter Extended
TOUT_RMPOFF Engine Torque Ramp Off Rate
TOUT_RMPON Engine Torque Ramp On Rate
DFSVS_CL VSS Below To Turn Fuel On

Dev / Engineering

4 parameters
Manufacturer Name Name
FP_EO_DM_SW FP EO DM SW
FP_ER_DM_SW FP ER DM SW
FP_PU_DM_SW FP PU DM SW
VS_EDG_MILE Pulses Per Mile Speedo

Dev / Engineering / Adaptive Fuel Maturity

9 parameters
Manufacturer Name Name
HESDETFR_CAL Forced Anti Stall Fraction
FUL_IOM_CAL Forced Maturity Cal
FUL_IOM_LMIN Number Of Loops To Be Mature
FUL_IOM_SMIN Min Switch Count For Learning Maturity
HESDET_SW Switch To Shut Off Hes Detection
VSBAR_MIN Max VSS For OSC
INJON_TST Injectors On When Tq Test Sw Set
LAM_TST Lambda When Tq Test Sw Set
SPK_TST Ignition Timing Engine Torque Ratio When Tq Test Sw Set

Dev / Engineering / Australian Trans Spec

1 parameters
Manufacturer Name Name
MIS_NMAX_NEU Max Misfire RPM Neutral

Diagnostics

18 parameters
Manufacturer Name Name
CCL_SW Check Fuel Cap Switch
J1979_01_1C Emissions Level For Vehicle
ENG_CONFIG_1 Engine Configuration 1
MODE08MAP_1 Mode08 Mapping 1
MODE08MAP_2 Mode08 Mapping 2
MODE08MAP_3 Mode08 Mapping 3
MODE08MAP_4 Mode08 Mapping 4
PIDMAP_1 PIDMAP 1
PIDMAP_2 PIDMAP 2
PIDMAP_3 PIDMAP 3
PIDMAP_4 PIDMAP 4
TESTIDMAP_1 Testid Mapping 1
TESTIDMAP_2 Testid Mapping 2
TESTIDMAP_3 Testid Mapping 3
TESTIDMAP_4 Testid Mapping 4
TESTIDMAP_5 Testid Mapping 5
TESTIDMAP_6 Testid Mapping 6
TESTIDMAP_7 Testid Mapping 7

Diagnostics / Ignition Coil Diagnostics

10 parameters
Manufacturer Name Name
BYPS_BRKPNT BYPS BRKPNT
COIL_NMAX COIL NMAX
COIL_VBATMAX COIL VBATMAX
COIL_VBATMIN COIL VBATMIN
CPRIMLVL Coil Primary Voltage Lower Threshold
CPRIMUP Coil Primary Voltage Upper Threshold
DIS_COP_HW DIS COP HW
PIPERR PIPERR
V_1PAC_ERR V 1PAC ERR
VNREVIDM VNREVIDM

Diagnostics / RPM Signal Diagnostics

5 parameters
Manufacturer Name Name
VCIDSW CID Test Switch
CIDUP CID Up Counter
V_PIP_HARD Max Duration Between PIPS For Fault
PIPLVLEXP PIP Fault Filter
PIPUP Profile Ignition Pickup Up Counter

EGR Control

15 parameters
Manufacturer Name Name
FN908H EGR Flow Rate Altitude
FN908G EGR Flow Rate Sea Level
EGRMPT EGR MPT
FN_EGR_WOT EGR Multiplier For WOT
FN211 EGR Multiplier With Coolant Temperature
FN220 EGR Multiplier With Inlet Air Temperature
FN220A EGR Multiplier With Outside Temperature
EGRDC_MAX Max EGR Duty Cycle
FN248C Max EGR Flow Rate
MINDES_CL Min Air Flow For EGR Disable
MINDES_SH Min Air Flow For EGR Enable
EGR_TP_MIN Min Throttle For EGT
FN230A Duration Delay To Begin EGR
FN070 Xnorm EGR 05
FN071 Ynorm EGR 04

EVAP Purge Control

5 parameters
Manufacturer Name Name
PG_CATMID_CL Cat Temperature For Purge Hysteresis
FN610 FTPT Transfer Relationship
PG_CATMID_SH Min Cat Temperature For Purge
PG_OL_START Open Loop Purge Delay
PG_DFS_TM Duration To Hold Purge When Cylinders Are Shut Off

Electronic Throttle Control (ETC)

2 parameters
Manufacturer Name Name
AIR_BRK_IAF Air Leakage From Brake Booster
ARCHLK Unmetered Air Leakage

Engine Temp Protection / Exhaust Temp (EGT) Control

19 parameters
Manufacturer Name Name
FN441D BP Effect On Exhaust Temperature
FNEXOMF Cat Exotherm Due To Misfire
FNFL_EXT Exhaust Flange Temperature
LAM_1ST_STEP Lambda 1st Step In Control
LAM_EXT_MAX Lambda Absoute Value Used For Starting Control
FN_EXT_STP Lambda Decrement For Temperature Difference
LAM_EXT_STEP Lambda Decrement When In Temperature Control Per 40ms
FN441A__A Lambda Effect On Exhaust Temp
LAM_EXT_LBT Lambda Exhaust Temperature LBT
LAM_AVE_SW Lambda Switch For Absolute Or Step Control
LAM_EXT_MIN Lowest Lambda Cal Allowed For Temperature Control
FN441B Spark Effect On Exhaust Temp
TC_SOAK_FL TC SOAK FL
FN445L Temperature Loss From Manifold To Catalyst
FN443L Temperature Loss From Manifold To O2 Sensor
FN442__A Duration Constant For Exhaust Temperature
FN443 Duration Constant For O2 Sensor Temperature
FNFL_NRM_X Xnorm Exhaust Temperature 18
FNFL_NRM_Y Ynorm Exhaust Temperature 18

Engine Temp Protection / Failsafe Cooling

12 parameters
Manufacturer Name Name
COOL_CHT_MAX CHT Temperature That Defines Stage 2
CHT_CRIT_SH CHT Temperature That Defines Stage 3
CHTIL_MAX CHT Temperature To Turn On Light Stage 1
COOL_CYL_OFF Cylinders To Shut Off In Stage 3
COOL_INT Failsafe Cooling Integral Gain Cal
COOL_GN Failsafe Cooling Overall Gain Cal
COOL_CYL_MIN Min Cylinders To Shut Off
COOL_CYL_IDL Min Cylinders To Shut Off At Idle
FNCOOL_MAX Number Of Cylinders To Turn Off
COOL_CAL_SW Switch To Permit Failsafe Cooling
COOL_MAN Switch To Force Manual Failsage Cooling
COOL_WOT_TIM Duration To Keep All Cylinders On At Wide Open Throttle

Engine Temp Protection / Oil Temp Control

7 parameters
Manufacturer Name Name
FIECT_3_CL ECT Inhibits Oil Overtemp Mode
FIECT_3_SH ECT To Permit Oil Overtemp Mode
FIRPM_3 RPM To Permit Oil Overtemp Mode
FILOAD_3 Engine Load To Permit Oil Overtemp Mode
FITP_3 Throttle To Permit Oil Overtemp Mode
FNTOIL_ECT Engine Torque Ratio Vs ECT
FNTOIL_RPM Engine Torque Ratio Vs RPM

Flex Fuel Sensor

1 parameters
Manufacturer Name Name
FFS_SW Flex Fuel Sensor Switch

Fuel / Startup Cold Fuel

5 parameters
Manufacturer Name Name
FN1362LX Base Fuel Table Cold
FN1361X_LOST Base Fuel Table Cold Enrichment Decay Lost Time
FN1361X Base Fuel Table Cold Enrichment Decay Time
FN1361L Base Fuel Table Enleanment When Cold
FN018C Ynorm Startup Cold Fuel 07

Fuel Control

40 parameters
Manufacturer Name Name
FN393F A/f Enrichment For Engagements Duration Forward
FN393R A/f Enrichment For Engagements Duration Reverse
FN387X A/f Multiplier To Avoid Stalls
WOTADP_SW Adaptation Wide Open Throttle Sw
FN371 Air Fuel Enrichment For Engagements
FKARCIDLE Aircharge Filter For Idle
ANTICIPATION Aircharge Switch For Anticipation Logic
ARCHSW Aircharge Switch For Filtering
ARCHIDLE_SW Aircharge Switch For Unique Idle Filter
ARCWOTCOR Aircharge Wide Open Throttle Multiplier
FNCYL_OFF__A Commanded Lambda When Cyl Off
FUL_OVRD_LAM Commanded Lambda When Fueling Is Overridden
ARCANTCOR Compensation For Max Cylinder Air Charge
ECTSTABL_CL ECT To Return To Base Fueling Table Cold
ECTSTABL ECT To Switch Base Table
FUL_OVRD_SW Fuel Override Switch
ECTSTABLTIM Fuel Duration To Switch Base Table
LAM_CYL_OFF Lambda When Cylinders Are Off
LOST_FUL_ADD Lost Fueling Adder
LOST_FUL_MUL Lost Fueling Multiplier
AIR_MAN_VOL Manifold Volume (liters)
OLMCL Non Feedback Fuel Multiplier
PRLDSW Percent Load Switch
EXT_CMD_SF Safety Factor To Adjust Max Cat Temperature
EXT_FLN_SF Safety Factor To Adjust Max Flange Temperature
EXT_FEGO_SF Safety Factor To Adjust Max HEGO Temperature
NOMINAL_AFR Stoichiometric Air Fueling Ratio
CAT_TEMP_SW Switch For Cat Temperature Ctl
FEG_TEMP_SW Switch For Ego Temperature Ctl
FLN_TEMP_SW Switch For Flange Temperature Ctl
FUL_CTRL_SW Switch Identifies Fuel Control Mode
CAT_MAX_LO Temperature To Begin Fuel Control For Cats Stage1
CAT_MAX_HI Temperature To Begin Fuel Control For Cats Stage2
FEGO_MAX Temperature To Begin Fuel Control For Ego
FLN_MAX Temperature To Begin Fuel Control For Flange Stage2
CAT_MAX_CL Temperature To Exit Fuel Control For Cats
FEGO_MAX_CL Temperature To Exit Fuel Control For Ego
FLN_MAX_CL Temperature Toexit Fuel Control For Flange
FN070C Xnorm Fueling 21
FN034A Ynorm Fueling 20

Fuel Control / Base Fuel Calc

6 parameters
Manufacturer Name Name
FN1360B Base Fueling Table
FN1362X_LOST Base Fuel Table Enrichment Lost Load
FN070B Xnorm Base Fueling Calculation 22
FN022BX Xnorm Base Fuel Calculation 07
FN072T Ynorm Base Fueling Calculation 21
FN072 Ynorm Crank Fueling 03

Fuel Control / Lean Error Correction

6 parameters
Manufacturer Name Name
LAM_HOT_MIN Min Allowed Short Term Fuel Trim With Lean Deviation
LAM_CHK_MAX Short Term Fuel Trim Inhibits Logic
FUEL_ERR_SW Switch Allowed For Use Of Plugged Filter Logic
OL_HOT_TM Duration Between Checks For Lean Deviation
P0148_TC Duration Constant For Lean Deviation
BYPLES1 Duration Delay Period For Lack Of Switching

Fuel Control / Lugging Mode

1 parameters
Manufacturer Name Name
FN212A Open Loop A/F Mult BP Lugging Sea Level

Fuel Injector Control

20 parameters
Manufacturer Name Name
FN1347 Engine Off Soak Duration Enrichment For Injectors
FNPWCOM_BK Fuel Inj Breakpoint Multiplier FordeltaP
FNPWCOM_HS Fuel Inj High Slope Multiplier FordeltaP
FNPWCOM_LS Fuel Inj Low Slope Multiplier FordeltaP
FNPWCOM_OFF Fuel Inj Offset Multiplier FordeltaP
FUEL_BRKPT Fuel Injector Breakpoint
AHISL Fueling Injector Hi Slope
ALOSL Fueling Injector Low Slope
MINPW Fuel Injector Lower Pulse Width
RF_DPREF_CAL Fuel Injector Pressure Level Drop
FN367W Injector Comp Batt Volt
INJ_PW_COMP Injector Comp For Pressure
FN1338 Injector Enrichement When Hot
FN1348 Duration Since Running For Injector Enrichement
FN001 Xnorm Fueling Injector 23
FN008B Xnorm Fueling Injector 24
FN008 Xnorm Fueling Injector 25
FN001A Ynorm Fueling Injector 25
FN001B Ynorm Fueling Injector 26
FN007 Ynorm Fueling Injector 27

Fuel Injector Timing

3 parameters
Manufacturer Name Name
FN336 Injector Timing Vs ECT
INTAKE_OPEN Intake Valve Opening Degrees
SPRAY_DELAY Duration For Fuel Travel To Valve

Fuel Pump Control

11 parameters
Manufacturer Name Name
FP_CRK_SW FP CRK SW
FP_DRIVER Fuel Pump Driver Type
FPMP_ON_TM Fuel Pump Min On Duration
FP_EO_DT_SW P0230 Switch For KOEO Test
FP_ER_DT_SW P0230 Switch For KOER Test
FP_PU_DT_SW P0230 Switch For Power Up
FPMP_OSM_ENA P0230 Switch When Running
FP_EO_ST_SW P0231 Switch For KOEO Test
FP_ER_ST_SW P0231 Switch For KOER Test
FP_PU_ST_SW P0231 Switch For Power Up
FPMP_SMON_EN P0231 Switch When Running

Fuel Pump Control / Two Speed Pump

1 parameters
Manufacturer Name Name
FP_PU_TM 2speed Fuel Pump Minimum On Duration

Gear Ratios / Auto Trans

9 parameters
Manufacturer Name Name
GRRAT1 1st Gear Ratio
GRRAT2 2nd Gear Ratio
GRRAT3 3rd Gear Ratio
GRRAT4 4th Gear Ratio
NVBASE Base N/V Of Vehicle
RT_CHAIN Chain Ratio
NOV_MAX Max Learned N/V
NOV_MIN Min Learned N/V
NOVCNT Multiplier NV

Gear Ratios / Manual Trans

5 parameters
Manufacturer Name Name
RT_FIRST_GR 1st Gear Ratio Manual
RT_SECOND_GR 2nd Gear Ratio Manual
RT_THIRD_GR 3rd Gear Ratio Manual
RT_FOURTH_GR 4th Gear Ratio Manual
RT_FIFTH_GR 5th Gear Ratio Manual

IMRC Control

2 parameters
Manufacturer Name Name
FN503 Imrc Opening Rpm
IMRC_TWOPOSN Imrc Two Position Sensor Switches

Idle Dashpot

16 parameters
Manufacturer Name Name
FN894 Dashpot Limit 1
FN894H Dashpot Limit 4th Gear
FN894L Dashpot Limit W/O Deceleration 4th Gear
FN879 Dashpot Decay Rate
DASCTL Dashpot For Zeroing Entry Timer
DASCLP_4INH Dashpot Inhibit 4th Gear
FN882A Dashpot Max Clip RPM
FN891 Dashpot Max Clip VS
DASMPH Dashpot Min Mph
FN830 Dashpot Preposition
SETLNG_TM Dashpot Settling Duration
DASMHYST Dashpot Hysteresis Band
DASPTK Isc Dashpot Gain
LOWLOD Min Engine Load Seen For Idle
TCDASD Dashpot Decay Time Constant
TCDASU Dashpot Recovery Time Constant

Idle Dashpot / Trans Dashpot

3 parameters
Manufacturer Name Name
FN894HLC Dashpot Clip 4th Gear W/locked Torque Converter
FN894LLC Dashpot Clip W/no Decel 4th Gear Lk'd Converter
FN879LC Dashpot Decay Rate W/locked Torque Converter

Idle Speed Control

51 parameters
Manufacturer Name Name
EDFPPM Air Adder When Fan Is On
FN819 Air Flow From Not Measured By MAF
FN818 Air Flow From PCV Not Measured By MAF
ITHBMA Air Flow Through Throttle Body
IFBS_RPM_TC Desried RPM Duration Constant
DSDRPM_OFF DSDRPM OFF
FN394F_TEH ECT Dependent Dly For N D Engagement
FN394R_TEH ECT Dependent Dly For N R Engagement
TCTRAN_RPM Filter For Recognizing N D/R Engagement
FN851A Gn For Idle Ctrl Err Deriv Ctl RPM Err
FN852A Gn For Idle Ctrl Err Prop Ctl
HEDFRPM HEDFRPM
FN822 Idle Air Adder For Powersteering Switch
FN1886 Idle Air Adder For Ps Transducer
IS_DRBASE Idle Speed Drive
IS_DRBASE_A Idle Speed Drive Alt
IS_NUBASE Idle Speed Neutral
IS_NUBASE_A Idle Speed Neutral Alt
FN825B Idle VSS RPM Adder For ACT
FN825A Idle Speed RPM Adder For ECT
FN880N Idle VSS RPM Using Duration Neutral
FN875HD Isc Drive Idle Air
IDCOFS Isc Duty Cycle Adder
IDCMUL Isc Duty Cycle Multiplier
FN875HN Isc Neutral Idle Air
ISC_PTP Isc Peak To Peak
ISC_PTP_SW Isc Peak To Peak Switch
FN8000 ISC Valve Transfer Function
IPSIMAX Max Air Integrator While Moving
IDLMAF Max Air Mass Allowed At
ISCLPD Max Allowed Idle Speed Drive
PSIBRM Max Value Used For Idle Integrator
VSCLP Max VSS For Feedback Idle
FN861 Min Idle VSS Drive Using TOT
FN861R Min Idle VSS Reverse Using TOT
MINMPH Min Mph For Idle
PSIBRN Min Value Used For Idle Integrator
RPMCTL RPM Deviation From Requested To Begin Idle Control
RPMDED RPM Deviation From Requested To Not Allow Adaptation
IS_GPAS_TC Duration Constant Dsd RPM Neutral Hi Cam
TCDESN Duration Constant Dsd RPM When At Limit
TC_OVER Duration Constant For Air Integrator Above
TC_UNDER Duration Constant For Air Integrator Below
NDDELTA Duration Delay Period For N D Transition
UPDISC Duration Dly Before Adaptation Is Allowed
EDF_DELAY Duration To Delay Air Adder When Fan Is On
UPDATM Update Rate Command
FN084 Xnorm Idle 13
FN061 Xnorm Idle 14
FN089 Ynorm Idle 24
FN060 Ynorm Idle 14

Idle Speed Control / A/C Idle Compensation

10 parameters
Manufacturer Name Name
FNACC_DELAY2 AC Air Compensation Delay Cycling
FNACC_DELAY AC Air Compensation Delay Initial
FNIDLCOT2 AC Compressor Delay Period Cycling
FNIDLCOT AC Compressor Delay Period Starting
FN881 Idle Air Adder For A/C Using Head Pressure Level
FN887 Idle Air Adder For A/C W ACT
FN885 Idle Air Adder For A/C W RPM
FN885TE Idle Air Adder Timer W RPM
DNAC_DR Idle VSS Adder With A/C On In Drive
DNAC_NEUT Idle VSS Adder With A/C On In Neutral

Idle Speed Control / Brake Input Idle Comp

5 parameters
Manufacturer Name Name
AIR_BRK_DCY AIR BRK DCY
AIR_BRK_DUR AIR BRK DUR
AIR_BRK_IAF AIR BRK IAF
AIR_BRK_SW AIR BRK SW
AIR_BRK_VS AIR BRK VSS

Idle Speed Control / HES Detection

3 parameters
Manufacturer Name Name
FN1301E Targeted RPM
FN032EX Xnorm Hes Det 25
FN032EY Ynorm Hes Det 26

Idle Speed Control / Idle Startup Control

10 parameters
Manufacturer Name Name
FN1862D Air Flow Multiplier In Drive
FN1862N Air Flow Multiplier In Neutral
BZZRPM Idle VSS Adder For Startup
BZZTM Idle VSS Adder For Startup Max Duration
FN826B Idle VSS RPM Adder For ACT At Startup
FN826A Idle VSS RPM Adder For ECT At Startup
TKDTN Duration To Keep Adder For Startup ACT
FN803A Duration To Keep Adder For Startup ECT
FN020C Xnorm Startup 13
FN018B Ynorm Alcohol 25

Knock Sensor Control

30 parameters
Manufacturer Name Name
KNK_FAST_CNT Cyl Events After Engine Load Trans For Knk Det Fst Counter
FAST_SPK_ADV Fast Ignition Timing Advance Increment
KNK_GLOBAL Global Or Individual Cylinder Switch
KNK_EVCNT Knk Events For Fast Adv Mode
FN1135B Knock Sensor Advance Limit
FN146D Knock Sensor Advance Rate Command
FN146E Knock Sensor Fast Advance Rate Command
KNK_MAX_RPM Knock Sensor Max RPM
KNK_MIN_ECT Knock Sensor Min ECT
KNK_MIN_LOAD Knock Sensor Min Engine Load
KNK_MIN_RPM Knock Sensor Min RPM
KI_MODE Knock Sensor Mode Switch
FN1148A Knock Sensor Retard
FN143B Knock Sensor Retard Rate Command
CYL_1_SENS Knock Sensor To Use For Cyl 1
CYL_10_SENS Knock Sensor To Use For Cyl 10
CYL_2_SENS Knock Sensor To Use For Cyl 2
CYL_3_SENS Knock Sensor To Use For Cyl 3
CYL_4_SENS Knock Sensor To Use For Cyl 4
CYL_5_SENS Knock Sensor To Use For Cyl 5
CYL_6_SENS Knock Sensor To Use For Cyl 6
CYL_7_SENS Knock Sensor To Use For Cyl 7
CYL_8_SENS Knock Sensor To Use For Cyl 8
CYL_9_SENS Knock Sensor To Use For Cyl 9
KNK_SNS_TYPE Knock Sensor Type
UP_NORM_EC Knock Duration Constant When Up Averaging
FN775 Limit Multiplier For ACT
FN776 Limit Multiplier For ECT
FN070U Xnorm Knock Sensor 28
FN071U Ynorm Knock Sensor 29

Knock Sensor Control / Knock - Transient Comp

2 parameters
Manufacturer Name Name
DN_NORM_EC Constant For Down Averaging
UP_FAST_EC Constant For Up Averageing During Transient

Knock Sensor Control / Knock Sensor Sensitivity

38 parameters
Manufacturer Name Name
KNK_GN_ADD1 Knock Sensor Gain Adder Snsr #1
KNK_GN_ADD2 Knock Sensor Gain Adder Snsr #2
FN2900A Knock Sensor Gain Sensor #1
FN2901A Knock Sensor Gain Sensor #2
FN2911A Knock Sensor Thers Cyl 1
KNK_TH_ADD1 Knock Sensor Thres Adder Cyl 1
KNK_TH_ADD10 Knock Sensor Thres Adder Cyl 10
KNK_TH_ADD2 Knock Sensor Thres Adder Cyl 2
KNK_TH_ADD3 Knock Sensor Thres Adder Cyl 3
KNK_TH_ADD4 Knock Sensor Thres Adder Cyl 4
KNK_TH_ADD5 Knock Sensor Thres Adder Cyl 5
KNK_TH_ADD6 Knock Sensor Thres Adder Cyl 6
KNK_TH_ADD7 Knock Sensor Thres Adder Cyl 7
KNK_TH_ADD8 Knock Sensor Thres Adder Cyl 8
KNK_TH_ADD9 Knock Sensor Thres Adder Cyl 9
FN2910A Knock Sensor Thres Cyl 0
FN2912A Knock Sensor Thres Cyl 2
FN2913A Knock Sensor Thres Cyl 3
FN2914A Knock Sensor Thres Cyl 4
FN2915A Knock Sensor Thres Cyl 5
FN2916A Knock Sensor Thres Cyl 6
FN2917A Knock Sensor Thres Cyl 7
FN2918A Knock Sensor Thres Cyl 8
FN2919A Knock Sensor Thres Cyl 9
KNK_TH_MUL1 Knock Sensor Thres Mult Cyl 1
KNK_TH_MUL10 Knock Sensor Thres Mult Cyl 10
KNK_TH_MUL2 Knock Sensor Thres Mult Cyl 2
KNK_TH_MUL3 Knock Sensor Thres Mult Cyl 3
KNK_TH_MUL4 Knock Sensor Thres Mult Cyl 4
KNK_TH_MUL5 Knock Sensor Thres Mult Cyl 5
KNK_TH_MUL6 Knock Sensor Thres Mult Cyl 6
KNK_TH_MUL7 Knock Sensor Thres Mult Cyl 7
KNK_TH_MUL8 Knock Sensor Thres Mult Cyl 8
KNK_TH_MUL9 Knock Sensor Thres Mult Cyl 9
FN1140A Knock Window Duration
KNKWIN_LEN Knock Window Duration
FN1141 Knock Window Bias
KNKWIN_START Knock Window Bias 1

MAF Sensor

26 parameters
Manufacturer Name Name
ACDC_SW ACDC Switch
AIR_ADAPT Air Meter Adaption Switch
FN052BF Backflow Entry TP
FN052BFLS Backflow Entry TP Low Throttle
F BP Modifier 1
F BP Modifier 2
BAPFMM Default Barometric Pressure Cal
FN1036A Engine Load W/Failed MAF
FN1036B Engine Load W/Failed MAF W/IMRC Open
MAF_HI_KOER MAF Upper AD Counts For KOER
MAF_LO_KOER MAF Upper AD Counts For KOER 1
MAF_LO_ER MAF Lower AD Counts
FN1023B MAF Temp Compensation
FN036M Maf Transfer Function
AIR_DEC_MUL Manifold Dynamics Filter For Deceleration
MAF_HI_ER Upper AD Counts
VMAFPIPLMT Pip Limit For Over Voltage Level Conditon
MAF_RPM_MAX2 RPM To Set Failed MAF
LOW_TP_SW Switch To Use Low Throttle Backflow
P0103_LVL Theshold For Over Voltage Level Conditon
TP_VMAF TPS To Set Failed MAF
P0103_TC Duration At Overvoltage To Be Failed
FN050 Xnorm MAF 29
FN070E Xnorm MAF 30
FN022Y Ynorm MAF 30
FN044 Ynorm MAF 31

O2 Sensor Control

33 parameters
Manufacturer Name Name
ACBIAS Bias When AC Is On
FN1353A Closed Loop Bias
FN1353E1 Feedback Bias Bank1
FN1353E2 Feedback Bias Bank2
FN315 Closed Loop Bias Multiplier W/VS
FNEGO_SWPT_1 Front EGO Switch Point Relative To Stoichiometric Air Fuel
FN_USHTR_DC Front O2 Heater Duty Cycle
FN_BAT_DCCMP Front O2 Heater Duty Cycle Batt Mult
USHTRDC_SW Front O2 Heater Duty Cycle Switch
US_HTR_ON Front O2 On
HEATER_HP11 Heater Switch For Bank1 Sensor1 O2
HEATER_HP21 Heater Switch For Bank2 Sensor1 O2
FNFLO HEGO Tip Temperature Change
TD_ADTOL Magnitude Of Single Pass For Update
HTR_VOLT_NOM Nominal O2 Heater Voltage Level
NUMEGO Number Of O2 Sensors
ADAP_TD_SKIP Number Of O2 Switches Before Adaptation
FNTDSEC8X10 O2 Transport Delay Period In Seconds
TD_LOADMAX O2 Transport Delay Period Max Engine Load Adapt
TD_NMAX O2 Transport Delay Period Max RPM Adapt
TD_SEC_MAX O2 Transport Delay Period Max Sec Adapt
TD_HEGO_MX O2 Transport Delay Period Max Duration
TD_ECT_MIN O2 Transport Delay Period Min Ect Adapt
TD_LOADMIN O2 Transport Delay Period Min Engine Load Adapt
TD_NMIN O2 Transport Delay Period Min RPM Adapt
TD_SEC_MIN O2 Transport Delay Period Min Sec Adapt
TD_HEGO_MN O2 Transport Delay Period Min Duration
TD_PTP_TOL Peak To Peak Tolerance Limit
EGO_KOER_SW Primary O2 Sensor Test Switch 3
US_HTR_WARM Temperature At Which Front O2 Is Warm
FN039E Xnorm O2 Sensor 32
FNFLO_NRM_X Xnorm O2 Sensor 33
FNFLO_NRM_Y Ynorm O2 Sensor 33

OBD-II / Catalyst Monitor (OBD-II)

48 parameters
Manufacturer Name Name
CAT1_FL_RAT Bank1 Fault Ratio
CAT2_FL_RAT Bank2 Fault Ratio
FEGO1_MX_TOT Bank 1 Front Oxygen Sensor Max Switch Count
FEGO1_MX_CT1 Bnk1 Max Frnt Hego Switches For AM Cell 1
FEGO1_MX_CT2 Bnk1 Max Frnt Hego Switches For AM Cell 2
FEGO1_MX_CT3 Bnk1 Max Frnt Hego Switches For AM Cell 3
FEGO2_MX_TOT Bank 2 Front Oxygen Sensor Max Switch Count
FEGO2_MX_CT1 Bnk2 Max Frnt Hego Switches For AM Cell 1
FEGO2_MX_CT2 Bnk2 Max Frnt Hego Switches For AM Cell 2
FEGO2_MX_CT3 Bnk2 Max Frnt Hego Switches For AM Cell 3
OBD2_FUL_LVL Low Fuel Limit
CAT_ACT_MAX Max Allowed ACT To Run Cat Monitor
AM1_MAX Max Allowed Air Mass For Cell 1 In Cat Monitor
AM2_MAX Max Allowed Air Mass For Cell 2 In Cat Monitor
AM3_MAX Max Allowed Air Mass For Cell 3 In Cat Monitor
CAT_ECT_MAX Max Allowed ECT To Run Cat Monitor
CAT_EGRMAX Max Allowed EGR To Run Cat Monitor
CAT_LD_MAX1 Max Allowed Load To Run Cat Monitor Cell 1
CAT_LD_MAX2 Max Allowed Load To Run Cat Monitor Cell 2
CAT_LD_MAX3 Max Allowed Load To Run Cat Monitor Cell 3
CAT_N_MAX1 Max Allowed RPM To Run Cat Monitor Cell 1
CAT_N_MAX2 Max Allowed RPM To Run Cat Monitor Cell 2
CAT_N_MAX3 Max Allowed RPM To Run Cat Monitor Cell 3
CAT_VSMAX Max Allowed Vechile VSS To Run Cat Monitor
CAT_MX_LEAN Max Cat Midbed Temperature To Run Cat Monitor
MIDBED_MAX1 Max Cat Midbed Temperature To Run Cat Monitor Cell 1
MIDBED_MAX2 Max Cat Midbed Temperature To Run Cat Monitor Cell 2
MIDBED_MAX3 Max Cat Midbed Temperature To Run Cat Monitor Cell 3
CAT_TP_MAX Max TP Rate For Cat
CAT_ACT_MIN Min Allowed ACT To Run Cat Monitor
AM1_MIN Min Allowed Air Mass For Cell 1 In Cat Monitor
AM2_MIN Min Allowed Air Mass For Cell 2 In Cat Monitor
AM3_MIN Min Allowed Air Mass For Cell 3 In Cat Monitor
CAT_ECT_MIN Min Allowed ECT To Run Cat Monitor
CAT_EGRMIN Min Allowed EGR To Run Cat Monitor
CAT_LD_MIN1 Min Allowed Load To Run Cat Monitor Cell 1
CAT_LD_MIN2 Min Allowed Load To Run Cat Monitor Cell 2
CAT_LD_MIN3 Min Allowed Load To Run Cat Monitor Cell 3
CAT_N_MIN1 Min Allowed RPM To Run Cat Monitor Cell 1
CAT_N_MIN2 Min Allowed RPM To Run Cat Monitor Cell 2
CAT_N_MIN3 Min Allowed RPM To Run Cat Monitor Cell 3
CAT_VSMIN Min Allowed Vechile VSS To Run Cat Monitor
MIDBED_MIN1 Min Cat Midbed Temperature To Run Cat Monitor Cell 1
MIDBED_MIN2 Min Cat Midbed Temperature To Run Cat Monitor Cell 2
MIDBED_MIN3 Min Cat Midbed Temperature To Run Cat Monitor Cell 3
CAT_REG_TEMP Min Rear O2 Temperature To Run Cat Monitor
CAT_APT_FLG Switch Allowed For Closed Throttle Counting
CAT_STBLE_TM Duration For Cat To Stabilize

OBD-II / Chronometric Monitor (OBD-II)

12 parameters
Manufacturer Name Name
OBD_VBAT_MAX Max Battery Volt To Run Test
IS_TCC_DCMX Max TCC DC To Turn Off Inductive Sig
FNMAXISIGTOT Max Tot For ISIG Test Vbat
TVP_ISIG_MAX Max TV To Turn Off Inductive Sig
OBD_VBAT_MIN Min Battery Volt To Run Test
MN_RT_TOT Min Tot For Ratio Test
OBDII_MIL_SW Obdii MIL Switch
OBDII_TST_SW Obdii Test Switch
MIL_ODO_SW Switch To Turn Off Distance Traveled Calc
SS1_IS_SW Switch To Turn Off Inductive Sig Ss1
SS2_IS_SW Switch To Turn Off Inductive Sig Ss2
TCC_IS_SW Switch To Turn Off Inductive Sig TCC

OBD-II / Comprehensive Component Monitor (OBD-II)

3 parameters
Manufacturer Name Name
CCM_MIN_AMB CCM Min Ambient To Run
CCM_MIN_SOAK CCM Min Soak Duration
CCM_MON_TM CCM Monitor Duration

OBD-II / Downstream O2 Monitor (OBD-II)

6 parameters
Manufacturer Name Name
DS_HEAT_TM DS HEAT TM
LEAN_THRESH LEAN THRESH
N_IDLE_CH N IDLE CH
N_IDLE_SL N IDLE SL
RICH_THRESH RICH THRESH
TC_VEGO_FA TC VEGO FA

OBD-II / EGR Monitor (OBD-II)

35 parameters
Manufacturer Name Name
FN1405_THRES Delta P Limit For Setting P1405
FN1406_THRES Delta P Limit For Setting P1406
EGR_402_AM EGR 402 AM
EGR_402_INC EGR 402 INC
EGR_402_MAX EGR 402 MAX
EGRMON_TM EGR Monitor Completion Duration Out
EGR_WRM_TM EGR Monitor Warm Up Offset Duration
EPT_VOPN_IDL EGR Valve Position At Engine Off
XFREPT EPT Transfer Function
EPTZER_VALID EPTZER VALID
PE_OBD_THRES Exhaust Pressure Limit For EGR Tests
IXFRPR Inverse EPT Transfer Function
EGR_MON_ACTH Max ACT For EGR Monitor
EGR_HT_AM_MX Max Air Flow For Hose Test
EGR_WOTAM_MX Max Air Mass For EGR Tests
DELARCH_EGR Max Change In Air Change For EGR Tests
EPTMAX Max Counts For EPT Sensor
EGR_OBD_NMAX Max Engine Speed For EGR OBDII Tests
EGR_MON_ACTL Min ACT For EGR Monitor
EGR_MIN_AMB Min Ambient Temperature To Run EGR Monitor
BP_EGRMON Min BP To Run EGR Monitor
EPTMIN Min Counts For EPT Sensor
FN202 Min Delta P For Sys Pressure High DC
EGR_VLV_OPN Min Duration For EGR To Be Open For Test
EGR_VLV_SHT Min Duration For EGR To Be Shut For Test
MIN_MVAC Min Vacuum To Run EGR Test
EGR_TCL_TRIP Number Of Trips To Complete Monitor
P401_TST_TM P0401 Test Duration
P0402TST_TM P0402 Test Duration
P0403TST_TM P0403 Test Duration
P0405TST_TM P0405 Test Duration
P0406TST_TM P0406 Test Duration
P1405TST_TM P1405 Test Duration
P1406TST_TM P1406 Test Duration
P1408TST_TM P1408 Test Duration

OBD-II / EVAP Purge Monitor (OBD-II)

47 parameters
Manufacturer Name Name
CVS_FALT_CNT Canister Vent Solenoid Limit For P1451
CANV_THRES Canister Vent Limit For P1451
FN610A_SCP Fueling Level To % Fueling W/O Saddle Tank
PGM_IDACT_MX Max Air Temperature For Idle Soak Test
PGM_PPM_TSTX Max Flow In Ph0 To Enter Ph1
PGM_TEMP_MAX Max For Temperature Test
PGM_FLI_MAX Max Fuel Level For Test
PGM_ID_LAMX Max Lambda For Purge
PGM_LOAD_MAX Max Engine Load For Purge Test
PGM_RST_CNT Max Number Of Purge Monitor Tries Per Key On
PGM_P0_WMXI Max Purge Flow For Idle Test
PGM_PS0_HI Max Tank Press For Ph0 Deadband
FN_TP_DT_MXI Max Tank Pressure Level Change To Abort Idle Test
FN_TP_DT_MX Max Tank Pressure Level Change To Abort Test
PGM_TANK_MAX Max Tank Pressure Level For Test
PGM_VAP_LIM Max Tank Prs Change To Go From Ph4 To Ph5
PGM_VAP_MAX Max Tank Prs To Go From Ph4 To Ph5
PGM_IDACT_MN Min Air Temperature For Idle Soak Test
PGM_BP_MIN Min Barometric Pressure For Purge Monitor
PGM_TEMP_MIN Min For Temperature Test
PGM_FLI_MIN Min Fuel Level For Test
PGM_ID_LAMN Min Lambda For Purge
PGM_LOAD_MIN Min Engine Load For Purge Test
PGM_MIN_SOAK Min Soak Time 1
PGM_PS0_LO Min Tank Press For Ph0 Deadband
PGM_TANK_MIN Min Tank Pressure Level For Test
PGM_IDVC_HLD Min Tank Pressure Level To Increment Timer
PGM_IDCR_TM Min Duration In Conditions To Beginning Ph1 Cruise Test
PGM_IDVC_TM Min Duration To Hold Vacuum To Beginning Ph1 Cruise Test
PGM_VS_MIN Min VSS For Test
PGM_RUN_CNT Number Of Times Purge Can Run Key On Before MIL
PGM_STKO_LIM Phase 4 Min Pressure Level For Stuck Open Valve
FNPGM_02LK_T Purge .020" Leak Duration
FNPGM_IDLE_T Purge Idle" Leak Duration
PGM_IDCRZ_SW Purge Monitor Idle And Cruise Test Switch
PGM_IDLE_SW Purge Monitor Idle Switch
FNPGM_PH2_TM Purge Phase 2 Leak Duration
FN_02LK_BLDB Tank Pressure Level Bleed Up Allowed For .020" Test
FN_IDLE_BLD2 Tank Pressure Level Bleed Up Allowed Idle Test
FN_PGM_BLDB Tank Pressure Level Bleed Up Allowed Purge Test
TPR_HI_ER Tank Pressure Level Transducer High Deviation
TPR_LO_ER Tank Pressure Level Transducer Low Deviation
TC_CANP TC CANP
CANP_THRES Limit For P0443 Code
PGM_ID_TM_MN Duration After Beginning For Test
FN157B Xnorm Canister Purge 34
FN158 Ynorm Canister Purge 34

OBD-II / Fuel Level Monitor (OBD-II)

4 parameters
Manufacturer Name Name
FLI_STK_TOL FLI STK TOL
K_FUEL_CAL K Fueling CAL
ULLAGE_FRAC ULLAGE FRAC
ULLAGE_LVL ULLAGE LVL

OBD-II / Fuel System Monitor (OBD-II)

4 parameters
Manufacturer Name Name
V_ADPAM_MAX Max Air Flow For Fuel Monitor
V_ADPN_MAX Max RPM For Fuel Monitor
V_ADPAM_MIN Min Air Flow For Fuel Monitor
V_ADPN_MIN Min RPM For Fuel Monitor

OBD-II / Idle Speed Monitor (OBD-II)

3 parameters
Manufacturer Name Name
IAC_MON_TM Iac Monitor Duration
IAC_ER_TM1 Duration At High Deviation For Code
IAC_ER_TM2 Duration At Low Deviation For Code

OBD-II / Misfire Monitor (OBD-II)

46 parameters
Manufacturer Name Name
ALPHAMIS ALPHAMIS
BETAMISHI BETAMISHI
BETAMISLO BETAMISLO
V_MIS_BGMAX Bypass Misfire Test When BG Duration > Cal
BYPS_BRKPNT BYPS BRKPNT 1
FNCATMOD Cat Temperature Limit Compensation Factor For Misfire
DACCELCAL_N DACCELCAL N
DACCELCAL_PC DACCELCAL PC
FNMISOK_97 Inhibit Table Used By Misfire Monitor
V_MIS_NHYS RPM To Turn Misfire Test On After BG
FNMISACT FNMISACT
FNMISTR FNMISTR
FNMISPCT_97 Max Allowable Misfire Rate Before Fault
CF_DNDTI_MAX Max DNDTI For Profile Compensation Adaptation
MIS_ECTMAX Max ECT To Run Misfire Test
CF_LOAD_MAX Max Engine Load For Profile Compensation Adaptation
CF_N_MAX Max RPM For Profile Compensation Adaptation
V_MIS_NMAX Max RPM To Perform Background Misfire Test
CF_VSBARMAX Max VSS For Profile Compensation Adaptation
CF_MTR_MIN Min Counts For Profile Compensation
CF_DNDTI_MIN Min DNDTI For Profile Compensation Adaptation
MIS_ECTMIN Min ECT To Run Misfire Test
CF_LOAD_MIN Min Engine Load For Profile Compensation Adaptation
CF_N_MIN Min RPM For Profile Compensation Adaptation
V_MIS_NMIN Min RPM To Perform Background Misfire Test
MIS_NTQ_DEL Min Engine Torque Drop For Misfire
MIS_MIN_TQ Min Engine Torque For Misfire
CF_VSBARMIN Min VSS For Profile Compensation Adaptation
MIS_AC_SW MIS AC SW
MIS_CAT_CONF MIS CAT CONF
MIS_OT_MAX MIS OT Max
MIS_PTQ_DEL MIS PTQ DEL
MIS_STRT_DLY MIS STRT DLY
MIS_TIPIN MIS TIPIN
MIS_TIPOUT MIS TIPOUT
MIS1000_EWMA MIS1000 EWMA
MIS200_EWMA MIS200 EWMA
MISLEVEL1000 Misfire Rate For Emissions Limit
MISHOT1000 MISHOT1000
MISHOT200 MISHOT200
MISID_NMAX MISIS NMAX
FNMISPRMULT Multiplier Table For Pair Limit
FN1615MIS Engine Torque Table Used By Misfire Monitor
V_HMIS_MIN V HMIS Min
FN070MIS Xnorm Misfire Monitor 35
FN034MIS Ynorm Misfire Monitor 35

OBD-II / O2 Heater Monitor (OBD-II)

2 parameters
Manufacturer Name Name
US_CUR_HI Upstream Present Monitor High Limit
US_CUR_LOW Upstream Present Monitor Low Limit

OBD-II / O2 Sensor Monitor (OBD-II)

28 parameters
Manufacturer Name Name
DSRD_FREQ Requested Frequency For EGO Test
EGO_ER_OV_TM EGO ER OV TM
EGO_LS_ENA EGO LS ENA
MAX_EGO_VOLT EGO Voltage Level For Fault
LEAN_AMP_M Lean Amplitude Limit
EGO_ACT_MAX Max ACT To Run EGO Monitor
EGO_LAM_DLMX Max Change In Lambda To Run Monitor
EGO_ECT_MAX Max ECT To Run EGO Monitor
FREQERR_BAND Max Deviation From Requested Frequency Run Test
LDEGO_DLTMX Max Engine Load Change To Run Test
LOAD_EGO_MAX Max Engine Load To Run Test
NEGO_DLTMX Max RPM Change To Run Test
N_EGO_MAX Max RPM To Run EGO Monitor
LAMAVE_MAX Max Short Term Fuel Trim To Run Test
EGO_TPR_MAX Max Tank Pressure Level To Run Test
VSEGO_DLTMX Max VS Change To Disable Test
VS_EGO_MAX Max VS To Run Test
EGO_ECT_MIN Min ECT To Run EGO Monitor
EGO_FREQ_MIN Min Frequency EGO Is Considered Malfunctioning
LOAD_EGO_MIN Min Engine Load To Run Test
RBIAS_EGO_MN Min RBIAS For Fault
N_EGO_MIN Min RPM To Run EGO Monitor
LAMAVE_MIN Min Short Term Fuel Trim To Run Test
VS_EGO_MIN Min VS To Run Test
LAM_CYC_MAX Number Of Fuel Cycles For Monitor W FAOSC
OV_TIME OV Duration
EGO_HTR_SW Switch To Permit EGO Monitoring
HTRCM_SW Switch To Shut Off EGO Present Monitor

OBD-II / Output Shaft Speed Monitor (OBD-II)

4 parameters
Manufacturer Name Name
VSCNT Failed VSS Up Counter
FNVMOV_LOAD Engine Load For Inferred Movement
NE_VMOV_MAX Max RPM Allowed For Inferred Movement
OS_MOV Max Output VSS Allowed For Inferred Movement

Open-Loop / Closed-Loop Fuel Control

22 parameters
Manufacturer Name Name
CTLOW ECT For Cold Beginning
CTHIGH ECT For Hot Beginning
FN311 Fuel Non Feedback Tp
FN338 Engine Load For Non Feedback Decels
LLDTM Low Engine Load Non Feedback Timer
VNMIN Min RPM To Run Fuel Test
DCEVS Min VSS For Non Feedback Deceleration
DCECTTM Mn Tm At Closed Throttle For Non Feedback Deceleration
FN1311 Non Feedback Delay Period
OLF_LAMBLEND Non Feedback Delay Period Blending Ramp
MINDLY Non Feedback Delay Period Timer For Wide Open Throttle
PURGSW Switch To Allow Open Loop Purge
HEGO_WARM Temperature For Front Hego To Go Feedback
HEGO_WARM_CL Temperature For Front Hego To Go Non Feedback
TEMPFB Temperature For Other Delays TEMP2
V_KAMBAR_MAX Limit To Set Adaptation Limit Code Too Lean
V_KAMBAR_MIN Limit To Set Adaptation Limit Code Too Rich
V_LAMBAR_MAX Limit To Set Fuel Limit Code Too Lean
V_LAMBAR_MIN Limit To Set Fuel Limit Code Too Rich
FN_TCSTRT Duration Delay Period For Feedback
OL_DELAYMAX Duration To Delay Period Non Feedback
FN311X Xnorm Open Feedback 36

Operating Environment

23 parameters
Manufacturer Name Name
FN703Q AC Head Pressure Transfer Function
FNCHT2R CHT Transfer Function For Dual Resistor
FNCHT1R CHT Transfer Function For Single Resistor
FNECT_CONV Conversion Of CHT Into ECT
DWFHP Dual Winding Fan Switch
FN703A ECT/ACT Transfer Function
FN703F ECT/ACT/TOT Transfer Function
FC_STA_DLY Fan Delay Period After Startup
HSFLOD High Speed Fan High Load Load To Turn On
HSFRPM High Speed Fan High Load RPM To Turn On
HSFECT1_SH High Speed Fan High Load Temperature To Turn On
HSFVS High Speed Fan High Load Versus To Turn On
HSFECT_CL High Speed Fan Off Ect
HSFECT2_SH High Speed Fan On Ect
HEDFHP High VSS Fan Switch
LSFVS_SL Low Speed Fan MPH To Turn Back On
LSFVS_CH Low Speed Fan MPH To Turn Off
LSFECT_CL Low Speed Fan Off Ect
FN_ACP_LSF Low Speed Fan On As A Function Of AC Head Pressure
LSFECT_SH Low Speed Fan On Ect
LSF_INVRT_HP Low Speed Fan PCM Invert Output
EDF_LOC Low Speed Fan PCM Pin Location
ECT_CNTS_MAX Max ECT Counts

Operating Environment / ACT Sensor

2 parameters
Manufacturer Name Name
ACT_ER_TM ACT ER TM
ACT_LVL ACT LVL

Operating Environment / Ambient Air Temp

6 parameters
Manufacturer Name Name
AMB_ACC_SUB Adder To Ambient When AC Is On
AMB_ACT_TOL Delta From ACT Ambient To Begin Changing
AMB_DELTA Delta From ACT To Ambient
AMB_ECT_MIN Min ECT Allowed For Ambient Update
AMB_VS_MIN Min VSS Allowed For Ambient Update
TC_INFAMB Duration Constant For Inferred Ambient

Operating Environment / Fuel Rail Temp Sensor

8 parameters
Manufacturer Name Name
RF_WARMRAIL Ambient Temperature To Switch To Higher Pressure Level
FUL_BOIL_DP Fixed Pressure Drop To Run When Fuel Boiling
TC_FRT_SOAK FRT Duration Constant Soak Temperature
FP_RTSNS_HP Fuel Rail Temperature Level Switch
FNFRTMUL Railtemp Multiplier
FNFRTTC Railtemp Duration Constant
FUL_BOILTEMP Railtemp When Fuel Boils
FRT_WGT_SOAK Weighting Factor Of ACT&ECT During Soak

RPM & VSS Limiters

26 parameters
Manufacturer Name Name
NLMTLO_1 3rd Gear High VSS Limit Exit
INF_NEU_ISC Inf Neu Isc
NDS_MAX_LD Max Engine Load For Neutral
INJ_MAX_LOAD Max Engine Load To Turn Off Injectors
INJ_MAX_N Max RPM To Turn Off Injectors
NDS_MIN_LD Min Engine Load For Neutral
NDS_TRQ Min Tq For Neutral
VSNEUT Min VS For Neutral
NDS_SWPT Neutral-drive Switch Point
FUL_NO_CO_SW No Fuel Cutout Switch
OS_MX Output Shaft VSS Limit
FNNO_LIM Output Shaft Speed Vs Torque
NLMTHI_0 Rev Limit 0 On
TR_N_LIM Rev Limit Min Torque Ratio
NLMTNEUHI_0 Rev Limit Neutral 0 On
FNRPM_LIM Rev Limit RPM Vs Torque
TQ_VS_MAN Rev Limit VSS To Exit Neutral Limiter
TQ_N_LIM_CL Rev Limit Torque Off
TQ_N_LIM_SH Rev Limit Torque On
TR_VS_MIN Speed Limit Min Torque Ratio
VS_LIM_CL Speed Limit Off
VS_LIM_SH Speed Limit On
TQ_NO_LIM_CL Speed Limit Output Shaft Off
TQ_NO_LIM_SH Speed Limit Output Shaft On
FNVS_LIM Speed Limit VS Vs Torque
FNTR_EOT_LIM Torque Limit Based On EOT For ETC

Rear O2 Sensor Control

38 parameters
Manufacturer Name Name
FAO_DISABLE FAOSC Inhibit Switch
RBIAS_LAM_MX Max AF For Integral Adaptation
RBIAS_AVG_MX Max Allowable Rear Bias Average
RBIAS_ECT_MX Max ECT For Rear Bias Control
RBIAS_INT_MX Max Integral Term For Rear Bias Control
RBIAS_LD_MAX Max Engine Load For Integral Adaptation
PROP_LD_MAX Max Engine Load For Proportional Bias
DS_CUR_HI Max Rear O2 Heater Present
RBIAS_N_MAX Max RPM For Integral Adaptation
PROP_N_MAX Max RPM For Proportional Bias
RBIAS_MAX Max Total Allowed Rear Bias Control
VEGO_FAOS_MX Max Voltage Level For Rear Bias Control
RBIAS_LAM_MN Min AF For Integral Adaptation
RBIAS_AVG_MN Min Allowable Rear Bias Average
RBIAS_ECT_MN Min ECT For Rear Bias Control
FAOP_EGO_TMP Min Ego Temperature For Rear Bias Control
RBIAS_INT_MN Min Integral Term For Rear Bias Control
RBIAS_LD_MIN Min Engine Load For Integral Adaptation
PROP_LD_MIN Min Engine Load For Proportional Bias
DS_CUR_LOW Min Rear O2 Heater Present
RBIAS_N_MIN Min RPM For Integral Adaptation
PROP_N_MIN Min RPM For Proportional Bias
RBIAS_MIN Min Total Allowed Rear Bias Control
VEGO_FAOS_MN Min Voltage Level For Rear Bias Control
RBIAS_VS_MIN Min VSS For Rear Bias Control
RBIAS_CL_TM Mn Duration In Feedback For Bias Trimg
HEATER_HP12 Rear O2 Heater Bank1 Downstream
HEATER_HP22 Rear O2 Heater Bank2 Downstream
HEGO_CONFIG Rear O2 Sensor Switch
DS_SWTPOINT Rear O2 Sensor Switch Point
REGO_TM REGO TM
DS_HTR_OFF Temperature To Turn Off Rear O2 Heater
DS_HTR_ON Temperature To Turn On Rear O2 Heater
TC_VEGO_FA_I Duration Constant For Integral Control
FNFI__B VEGO Setpoint For FAOSC Integral Term
FNFP__B VEGO Setpoint For FAOSC Prop Term
FN041E__A Xnorm Rear O2 Sensor 25
FN041C__A Ynorm Rear O2 Sensor 23

Returnless Fuel Pump

37 parameters
Manufacturer Name Name
RF_FFLLMUL Adaptation Voltage Level Low Limit Multiplier
RF_FFULMUL Adaptation Voltage Level High Side Limit Multiplier
RF_COLD_MOD Cold Beginning Modifacation Switch
FNRF_LINEAR Requested Pressure Level Drop Across Injectors
FPDM_OFF Duty Cycle When Pump Is Off
RF_FFDDBND Feedforward Voltage Level Deadband
RF_MODE Fixed Duty Cycle Mode Switch
RF_DC_CAL Fixed Duty Cycle To Run In Fixed Mode
FPUMP_FREQ FPUMP FREQ
FRP_ERRLMT FRP ERRLMT
FLI_SCP_SW Fuel Level Input Over SCP Switch
FP_DGAIN_MUL Fuel Pump Gain Cal Derivative Term
RF_I_GAIN Fuel Pump Gain Cal Integral Term
RF_P_GAIN Fuel Pump Gain Cal Proportional Term
FPC_DC_MAX Fuel Pump Max Duty Cycle
FPC_DC_MIN Fuel Pump Min Duty Cycle
FNRF_SSFF Fuel Pump Voltage Level Table
FNRGP Fuel Rail Pressure
FRP_ERRTOL Fuelpump Tst Quantity Of Fuel Pressure Level Drop Deviation
FRP_MID Fuelpump Tst Deviation Buffer
FRP_RATE Fuelpump Tst Max Rate Of Fuel Pressure Level Change
FRP_MIDTOL Fuelpump Tst Pressure Level Below Allowed For Test
FNRF_COLD Injector Pressure Level Drop Change When Cold
FNRF_BOIL Injector Pressure Level Drop Change With ACT
RF_FRDPS_MAX Max Counts For IPS Sensor To Be Good
MAX_DPREF Max DPREF
RF_FRDPS_MIN Min Counts For IPS Sensor To Be Good
FP_FRTS_TM P0183 Fault Timer Set High
FP_FRDPS_TM P0190 P0193 Fault Timer Set High
FLI_ER_TM2 P0463 Fault Timer Set High
FNRF_DP_ADC Pressure Level Sensor Transfer Relationship
RF_FF_ADAPT Switch To Turn On/Off Adaptation Fuel Pump Volt
RF_UPRATE Duration Between Adaptation Updates
RF_DP_ERR_TC Duration Constant For Delta P Across Injectors
FNFP_IR_DROP Voltage Drop To FPDM
FNRFNRM_FLOW Xnorm Returnless Fueling Pump 37
FNRFNRM_RAP Ynorm Returnless Fuel Pump 23

Shift Scheduling / Torque Converter Lock Schedule

7 parameters
Manufacturer Name Name
LUHTOT_SH Hot Lock Enter Temperature
LUHTOT_CL Hot Lock Exit Temperature
CS_MAX_TIME Max Duration To Spend In Cold Shift Mode
NELUMN Min RPM To Lock
SRLKOT Min VSS Ratio To Lock Hot Mode
VSLUMN Min VSS To Lock
FN690 Tot To Exit Cold Shift

Shift Scheduling / Torque Converter Lock Schedule / 4x4 Low Range

3 parameters
Manufacturer Name Name
NE12S4L Trans Wot Shift RPM 12 4x4 Low
NE23S4L Trans Wot Shift RPM 23 4x4 Low
NE34S4L Trans Wot Shift RPM 34 4x4 Low

Shift Scheduling / Torque Converter Lock Schedule / Manual Shift Scheduling

7 parameters
Manufacturer Name Name
VS21PI 2-1 Pullin Max Speed
VS32P2 3-2 Pullin Max Speed
NEHSM1 RPM To Shift Into 2 In Manual 1
PDLTIM Shifter Residence Timer
VS43PI Speed To Override O/d Cancel Input
TM_HS_M12 Duration To Command 3rd On Manual 1-2
TM_M12 Duration To Delay Manual 1 Override

Shift Scheduling / Torque Converter Lock Schedule / Performance Shift Schedule

5 parameters
Manufacturer Name Name
PWF_DEC_E Performance Decrement Factor
FNPWFE Performance Weighting Factor
TMHOLDPWF Tm To Hold Weight Factor After Upshift
FNPWFX Xnorm Performance Shift Schedule 27
FNPWFY Ynorm Performance Shift Schedule 25

Shift Scheduling / Torque Converter Lock Schedule / RPM-Based Shift Scheduling

8 parameters
Manufacturer Name Name
TCVSRSS Filter For Vehicle Acceleration Rate Predictive
TCVS Filter For Vehicle Speed
VSRATE_MAX Max Vehicle Acceleration Rate
TPNEPUMIN Min Pedal For Predictive Shift
NEPUMIN Min RPM For Predictive Shift
NE12S Trans Wot Shift RPM 12
NE23S Trans Wot Shift RPM 23
NE34S Trans Wot Shift RPM 34

Shift Scheduling / Torque Converter Lock Schedule / Shift Hunting Control

3 parameters
Manufacturer Name Name
FN12PPH 1-2 Shift PPH Function
FN23PPH 2-3 Shift PPH Function
FN34PPH 3-4 Shift PPH Function

Shift Scheduling / Torque Converter Lock Schedule / Shift Schedule

6 parameters
Manufacturer Name Name
FN12S Trans Shift Schedule 12
FN21S Trans Shift Schedule 21
FN23S Trans Shift Schedule 23
FN32S Trans Shift Schedule 32
FN34S Trans Shift Schedule 34
FN43S Trans Shift Schedule 43

Shift Scheduling / Torque Converter Lock Schedule / Torque Converter Control

18 parameters
Manufacturer Name Name
VSCTDY Speed Above To Lock Converter At CT
U12DLY Duration To Delay Period Conv Lk After 12
D21DLY Duration To Delay Period Conv Lk After 21
U23DLY Duration To Delay Period Conv Lk After 23
D32DLY Duration To Delay Period Conv Lk After 32
TMD2SLP Duration To Delay Conv Lk After 32b
U34DLY Duration To Delay Period Conv Lk After 34
D43DLY Duration To Delay Period Conv Lk After 43
TMD3SLP Duration To Delay Conv Lk After 43b
TMCTDY Time Required To Delay Conv Lk After Tip In From CT
UWOTDLY Duration To Delay Period Conv Lk At Wide Open Throttle
TPUNWOT TP Above To Delay Period Conv Lk At Wide Open Throttle After Shift
FN2LS Trans Converter Lock 2nd
FN3LS Trans Converter Lock 3rd
FN4LS Trans Converter Lock 4th
FN2US Trans Converter Unlock 2nd
FN3US Trans Converter Unlock 3rd
FN4US Trans Converter Unlock 4th

Shift Scheduling / Torque Converter Lock Schedule / Torque Request Modifier

1 parameters
Manufacturer Name Name
FN615TQ Trans Shift Schedule Torque Compensation Factor

Spark Advance Control

15 parameters
Manufacturer Name Name
FN1329A Firing Order
SPK_ADD Global Ignition Timing Adder
SPK_MUL Global Ignition Timing Multiplier
TQ_TIP_NMAX Max RPM For Tip In Tq Control
FN741 Max Ignition Timing When At Low Engine Load
SPUCLP Max Ignition Timing Limit
TQ_TIP_NMIN Min RPM For Tip In Tq Control
TQ_TIP_VS Min VSS For Tip In Tq Control
SPLCLP Min Ignition Timing Limit
SPK_OCT_NUM1 RON Octane For Borderline Ignition Timing Table
SPK_OCT_NUM2 RON Octane For Borderline Ignition Timing Table 2
FN721 Spark Adder For EGR
FN2600 Ignition Timing For Deceleration
SPK_LUGSW Ignition Timing Lug Switch
FN017E Xnorm Ignition Timing 39

Spark Advance Control / Borderline Knock Spark

14 parameters
Manufacturer Name Name
FN2200 Borderline Knock Table
FN2225 Octane Plug Ignition Timing Compensation Factor
FN2250 Ignition Timing Adder After Engine Load Increase
FN2240B Ignition Timing Adder For A/F When Open Loop
FN2230 Ignition Timing Retard Act Multiplier
FN2220 Ignition Timing Retard Ect Multiplier
FN725A Ignition Timing Retard For Act
FN724A Spark Retard For Ect
FN016 Xnorm Borderline Knock 29
FN017 Xnorm Ignition Timing 38
FN070X Xnorm Borderline Knock 40
FN012 Ynorm Borderline Knock 26
FN013 Ynorm Ignition Timing 38
FN015W Ynorm Borderline Knock 28

Spark Advance Control / Cold Start Spark

12 parameters
Manufacturer Name Name
FN2001A Adder Max Allowed Ignition Timing Cold For RPM/Engine Load
FN2002 Adder Max Allowed Spark Cold For TP/cattemp
CSSR_MAXISC Max ISC Duty Allowed For Cold Beginning Ignition Timing
FN2000D Maximum Allowed Ignition Timing Table Cold Starts
CSSR_MN_MVAC Min Man Vac Allowed For Cold Beginning Ignition Timing
SPK_CSSR_EGR SPK CSSR EGR
SPK_LOLD_STP SPK LOLD STP
STAB_LOLD_AM STAB LOLD AM
FN020D Xnorm Cold Beginning 41
FN028 Xnorm Cold Start 30
FN018G Ynorm Cold Start 29
FN029 Ynorm Cold Start 27

Spark Advance Control / Idle Speed Control

9 parameters
Manufacturer Name Name
FN760 Quantity Of Engine Torque Reserve For Idle
FNIFBS_D Requested Idle Ignition Timing Drive
FNIFBS_N Requested Idle Ignition Timing Neutral
FBS_ENTRY_TC Feedback Ignition Timing Entry Duration Constant
FNSPKFBSGAIN Idle Ignition Timing Prop Gain Cal Ignition Timing
SPK_FBS_MIN Lowest Ignition Timing Value Used For Idle Control
SPK_FBS_DLT Min Allowed Retard From MBT For Idle
FN797 Ignition Timing Retard To Engine Torque Ratio For Idle
FN767 Engine Torque Ratio To Ignition Timing Retard For Idle

Spark Advance Control / Ignition Coil Dwell

3 parameters
Manufacturer Name Name
COIL_NMAX Max RPM For Coil Test
REPET_SPK_HI Repetitive Ignition Timing Inhibit RPM
REPET_SPK_LO Repetitive Ignition Timing Re Permit RPM

Spark Advance Control / Individual Cylinder Spark

10 parameters
Manufacturer Name Name
SPKAD_CYL1 Global Ignition Timing Adder For Cylinder 1
SPKAD_CYL10 Global Ignition Timing Adder For Cylinder 10
SPKAD_CYL2 Global Ignition Timing Adder For Cylinder 2
SPKAD_CYL3 Global Ignition Timing Adder For Cylinder 3
SPKAD_CYL4 Global Ignition Timing Adder For Cylinder 4
SPKAD_CYL5 Global Ignition Timing Adder For Cylinder 5
SPKAD_CYL6 Global Ignition Timing Adder For Cylinder 6
SPKAD_CYL7 Global Ignition Timing Adder For Cylinder 7
SPKAD_CYL8 Global Ignition Timing Adder For Cylinder 8
SPKAD_CYL9 Global Ignition Timing Adder For Cylinder 9

Spark Advance Control / MBT Spark Control

8 parameters
Manufacturer Name Name
FN2300A MBT Ignition Timing Table
FN2335 Ignition Timing Adder For MBT Using EGR
FN2150CMB Ignition Timing Adj For Combustion Noise
FN2150EMI Spark Adj For Emissions
FN730 Ignition Timing Modifier For MBT Based On A/F Ratio
FN2320 Ignition Timing Retard Ect Multiplier To MBT
FN014 Xnorm MBT Ignition Timing 44
FN013PCT Ynorm MBT Spark 28

Spark Advance Control / Piston Slap Spark

1 parameters
Manufacturer Name Name
FN702 Ignition Timing Compensation Factor For ECT

Spark Advance Control / Tip-In Spark Retard

6 parameters
Manufacturer Name Name
FN704A Max Spk Retard For Tip In Based On RPM
SPK_ARCH_MIN Limit To Identify Ending Of Tip In
SPK_D_AIRCHG Limit To Identify Tip In
FN732 Tip In Borderline Modifier Slope ECT
FN1142 Tip In Spark Retard Table For Change In AM
FN024F Ynorm Tip In Spark Retard 29

Speed Density Calc

12 parameters
Manufacturer Name Name
FN040A Estimated Aircharge Func RPM
FN004 Exhaust Backpressure Correction Func BP
FN052M MAP At Zero Aircharge
FN035A Peak Load At Sealevel
FN052N_C Slope Of MAP Vs Aircharge Closed IMRC
FN052N_O Slope Of MAP Vs Aircharge Open IMRC
FN059 Temp Correction For Voleff
FN074B Upstream Pressure Func Air Mass
FN1052 Voleff Compensation For ECT&ACT
FN022V Xnorm VSS Density 48
FN052BP Y Intercept Compensation Of Mapping Vs Aircharge
FN022V Ynorm VSS Density 47

System Config Switches

53 parameters
Manufacturer Name Name
HP_4X4L 4x4 Low Switch
AC_RLY_IS_NC AC Relay Normally Closed
HPACL Adjustable Shock Control Switch
ACL_PLSE_HP Adjustable Shock Pulse HP
ACPSEN_HP Air Cond Pressure Level Sensor Switch
ACCS_HP Air Cond Switch
BPSSW BP Sensor Switch
BIHP_SCP Brake Input Scp Switch
BIHP Brake Input Switch
PCOMP_SW Canister Purge Compensation Switch
PCOMP_ENA_SW Canister Purge Permit Switch
PRG_FLOW_SW Canister Purge Flow Test Switch
PGM_HW_SW Canister Purge Monitor Switch
PGM_SELECT Canister Purge Selection Switch
CCL_CHK Check Fueling Cap Bulb Check
CHT_SNS_HP Cht Sensor Switch
ECT_SNS_HP Ect Sensor Switch
PFEHP EGR Type Switch
EDFHP Electrodrive Fan Switch
EOT_HP EOT Switch
ETC_HP Etc Switch
RFS_TYPESEL Fuel Pump System Type
FP_TYPE_SEL Fuel Pump Type
IMRCSENSHP Imrc Sensor Type
IMRCHP Imrc Switch
DEGPIP Number Of Crank Degrees Per PIP
NUMCYL_0 Number Of Cylinders
ENGCYL Number Of Cylinders /2
OS_PULS_REV Number Of Holes For OSS Sensor
KNK_SENSORS Number Of Knock Sensors
OSS_HP Oss Switch
PATS_DISABLE PATS Inhibit Switch
PSPSHP Powersteering Pressure Level Switch
PSPTHP Powersteering Pressure Level Transducer Sw
PTO_HP Pto Switch
PUL_PER_REV PUL PER REV
TCIL_FL_SW Switch To Flash TCIL For Fault
NEUTRAL_SW Switch To Force To Neutral
TID_CPP_SW Switch To Shut Off Continous CPP Test
THRMHP Thermactor Switch
TQ_OSC_SW Tip In Oscillation Switch
TQ_MODULE_SW Engine Torque Module Switch
AUTO_TRNS_SW Trans Auto Switch
TRLOAD Trans Engine Load Switch
TSTRAT Trans Type
TCSS_HP Transfer Case Switch
HP_CIDSEL Type Of Cam Sensors
TID_CPP_MODE Value Used For INDS When Clutch Is Pushed
VCAMHP Variable Cam Switch
PCM_VSO_SW PCM VSS Source Enable
VS_HP Vehicle Speed Sensor Switch
VSHP_SCP VSS Sensor Switch Over SCP
VSTYPE Vehicle Speed Sensor Type

Torque Calculation

10 parameters
Manufacturer Name Name
FN632 A/F Ratio As Function Of Engine Torque Ratio
INERTIA_ENG Engine Inertia
FN612 Multiplier To Engine Torque Using % Ethanol
FN766 Ignition Timing Retard To Engine Torque Ratio
FN623 Engine Torque Compensation Factor As Function Of A/F Ratio
FN799 Engine Torque Ratio To Ignition Timing Retard
FNINDICATED Torque Table
FNFRIC_MOTOR Torque Table Friction
FNTQ_NORM_N Xnorm Engine Torque Calculation 50
FNTQ_NORM_LD Ynorm Engine Torque Calculation 50

Torque Converter Management / Misc Controls

40 parameters
Manufacturer Name Name
SLIP_DES_MIN Amnt Of Desired Converter Slip During Shift
ACSLIP Desired Converter Slip When AC Applies
K_CLUTCH Gain Cal Of Converter Clutch Plate Psi/Ft Lb
MAXSLIP1 Max Quantity Of Requested Slip
AC_CTL_OFF Max Exit Duration For Converter Slip W/AC
AC_SLP_WDOG Max Duration For Converter Slip W/AC
TMCTDY Time Required To Delay Conv Lk After Tip In From CT
VSCTDY Speed Above To Lock Converter At CT
SRLUMN Minimum Spd Ratio To Lock
FNUPSSFT23 Multiplier Of Cap During 23 Shift
FNUPSSFT34 Multiplier Of Cap During 34 Shift
OPNRMPMULTL Multiplier On Cap For Unlocks
OPNRMPMULTU Multiplier On Cap Locked To Slip W Shift
OPNRMPMULT Multiplier On Cap Locked To Slipping
OPNRMPOFFL Offset On Cap For Unlocks
OPNRMPOFFU Offset On Cap Locked To Slip W Shift
OPNRMPOFF Offset On Cap Locked To Slipping
MXRMPOPENTM Ramp Open Max Duration
SLPRMPOPN Ramp Open Slip
FN_SRLK VSS Ratio To Lock Converter
FN2SSLP Steady State Torque Conv Slip 2nd Gear
FN3SSLP Steady State Torque Conv Slip 3rd Gear
FN4SSLP Steady State Torque Conv Slip 4th Gear
TPUNBRK TPS To Not Unlock W Brake
TPUNCT TPS To Open Conv At Closed Thr
TRUHAC Throttle Rate To Unlock HiTP Tip-in
TRUHDC Throttle Rate To Unlock HiTP Tip-out
TRULAC Throttle Rate To Unlock LowTP Tip-in
TRULDC Throttle Rate To Unlock LowTP Tip-out
AC_CTL_TM Duration Allowed For Converter Slip W/AC
CTDLY Duration To Delay Period Lockup During Tip In
OTCTDLY Duration To Delay Period Lockup During Tip In Over Temperature
UNLKDLYTM Time To Remain Locked Closed Throttle
UNLKDLYTM4 Duration To Remain Locked Closed Throttle 4th
BRKRLCKTM Duration To Remain Unlocked After Brake Input
TCAP_HLK Torque Capacity Multiplier For HL
FN067 Xnorm Misc 49
FN114A Ynorm Misc 70
FN114B Ynorm Misc 71
FN114C Ynorm Misc 72

Torque Converter Management / Shift Scheduling

12 parameters
Manufacturer Name Name
TMCLUP2 Feedback Upshift To 2nd
TMCLUP3 Feedback Upshift To 3rd
TMCLUP4 Feedback Upshift To 4th
DSRU2 Delta Ratio For 12 Shift
DSRUE2 Delta Ratio For 12 Shift End
DSRU3 Delta Ratio For 23 Shift
DSRUE3 Delta Ratio For 23 Shift End
DSRU4 Delta Ratio For 34 Shift
DSRUE4 Delta Ratio For 34 Shift End
TMOLUP2 Open Loop Upshift To 2nd
TMOLUP3 Open Loop Upshift To 3rd
TMOLUP4 Open Loop Upshift To 4th

Torque Converter Management / Torque Converter Lockup Rate

8 parameters
Manufacturer Name Name
STROKE_DRP Amount Of RPM Drop To Signal Conv Is Locking
TCUPS Filter For Desired Slip During Shifts
TCLCK Filter For Desired Slip Higher TP
TCLCKL Filter For Desired Slip Lower TP
STROKE_TM Duration To Hold Conv Cl When Applying
TCRMP_HK Torque Converter Lockup Rate After Tip In
TCRMP_HK_SFT Torque Converter Lockup Rate After Upshift
TCRMP_HK_TP Torque Converter Lockup Rate W/high Tp

Torque Limits

3 parameters
Manufacturer Name Name
FNANTI_STALL Min Engine Torque Allowed
FNTR_SAI_SET Engine Torque Reduction By Ignition Timing Only
FNTR_SPK_LVL Engine Torque Reduction Ignition Timing Authority

Torque Limits / Auto Trans

19 parameters
Manufacturer Name Name
DLY_UNCLK_TQ Delay Duration To Unlock For TQ
MX_ALLOW_SLP Max Slip Across Conv To Be Excessive
FNTQ_MX1 Torque Limit Table 1st Gear
FNTQ_MX2 Torque Limit Table 2nd Gear Open Conv
FNTQ_MX3CC Torque Limit Table 3rd Gear Locked Conv
TQ_MAX_HRD3 Torque Limit Table 3rd Gear Locked Conv 1
FNTQ_MX3 Torque Limit Table 3rd Gear Open Conv
FNTQ_MX4CC Torque Limit Table 4th Gear Locked Conv
TQ_MAX_HRD4 Torque Limit Table 4th Gear Locked Conv 1
FNTQ_MX4 Torque Limit Table 4th Gear Open Conv
FNTQ_MX5CC Torque Limit Table 5th Gear Locked Conv
FNTQ_MX5 Torque Limit Table 5th Gear Open Conv
FNTQ_MX0 Torque Limit Table Not Forward
FNTQ_MAX Torque Truncation Table
FNMX_LK_TQ2 Tq Limit Table 2nd Gear Locked Conv Hot
FNMX_LK_TQ3 Tq Limit Table 3rd Gear Locked Conv Hot
FNMX_LK_TQ4 Tq Limit Table 4th Gear Locked Conv Hot
FNMX_LK_TOT Xnorm Auto Trans 37
FNMX_LK_RPM Ynorm Auto Trans 35

Trans Control

25 parameters
Manufacturer Name Name
FNUP1DLY Clutch Fill Duration 12 Shift
FNUP2DLY Clutch Fill Duration 23 Shift
FNUP3DLY Clutch Fill Duration 34 Shift
NE34COMP Compensation For TQ Loss
TSTBCSDC Duty Cycle To Lock In
NEDROP RPM Drop For Shift
GRMSFT Gear To Lock In To
TCC_LK_LVL Level For Setting TCC Fault
MAXNEPU Max Engine RPM Accel Rate For Anticipated Shifting
TP_SH_VAL2 Min Tp For 1-2 Shift Validation
TP_SH_VAL3 Min Tp For 2-3 Shift Validation
TP_SH_VAL4 Min Tp For 3-4 Shift Validation
VS_SH_VAL2 Min Vs For 1-2 Shift Validation
VS_SH_VAL3 Min Vs For 2-3 Shift Validation
VS_SH_VAL4 Min Vs For 3-4 Shift Validation
FN689U RPM Based Shifts For Failed VSS
FN689V RPM For Failed Speed Sensor
FNSSCTL2 Shift Solenoid Truth Table
SFT_ERR_UP Shift Validation Up Counter
SWBCTST Switch To Lock Converter
SW_MSF Switch To Lock In Gear
NEPU_SW Switch To Use RPM Anticipated Shifts
FNTOTDLY TOT Delay Period Multiplier
TOT_OTEMP_S Trans Temperature For Entering Over Temperature
VSU4HOT Wide Open Throttle RPM For Overtemp

Trans Control / Trans Gear Timing

19 parameters
Manufacturer Name Name
GR_SEQ_421 First Step 0f 42 Kickdown
GR_SEQ_131 First Step Of A 1-3 Shift
GR_SEQ_141 First Step Of A 1-4 Shift
TCUPON12 Duration For 12 Upshift To Complete
TCUPON23 Duration For 23 Upshift To Complete
TCUPON34 Duration For 34 Upshift To Complete
TCDN1ON Duration For Downshift Into 1st To Complete
TCD43ON Duration For Downshift Into 3rd To Complete
TCDNON Duration For Downshift To Complete
TMSQ21P1 Duration To Sequence 21 In Manual 1
TMSQ32P2 Duration To Sequence 32 In Manual 2
FNTMSEQ32P4 Duration To Sequence 42 Kickdown
TMSQ23P4 Duration To Stay In 2nd Before 3rd
TMSQ34P4 Duration To Stay In 3rd Before 4th
TCDNMF Duration To Use Pressure For Manual Shift
TMVEDN Duration To Verify Downshift
TMVEUP Duration To Verify Upshift
FNXVSBART_RT Xnorm Gear Timing 38
FNXTMINGR4 Ynorm Gear Timing 36

Trans Control / Trans Pressure Control

10 parameters
Manufacturer Name Name
TVPMIN_2 Minimum TV Pwr/off Into 2nd
TVPMIN_3 Minimum TV Pwr/off Into 3rd
TVPMIN_4 Minimum TV Pwr/off Into 4th
TVPMINPT_2 Minimum TV Pwr/on Into 2nd
TVPMINPT_3 Minimum TV Pwr/on Into 3rd
TVPMINPT_4 Minimum TV Pwr/on Into 4th
SCINT1 Pressure Offset 1st Gear
SCINT2 Pressure Offset 2nd Gear
SCINT3 Pressure Offset 3rd Gear
SCINT4 Pressure Offset 4th Gear

Trans Control / Trans Pressure Control / 1-2 / 2-1 Shift

14 parameters
Manufacturer Name Name
FN12TPOT 1-2 Shift Pressure Multiplier Cold
FN21T 2-1 Shift Pressure Multiplier Cold
SCSLP1SD Downshift Slope Into 1
TVPMIN_1 Minimum TV Pwr/off Into 1st
TVPMINPT_1 Minimum TV Pwr/on Into 1st
FN12DYTX_VS Trans Tv Pressure 12
FN21DYTX_VS Trans Tv Pressure 21
SCSLP2SU Upshift Slope Into 2
FNX12T Xnorm 1-2 2-1 Shift 39
FN101 Xnorm 1-2 2-1 Shift 40
FNX21T Xnorm 1-2 2-1 Shift 41
FNX12V Ynorm 1-2 2-1 Shift 37
FN067C Ynorm 1-2 2-1 Shift 38
FNX21V Ynorm 1-2 2-1 Shift 39

Trans Control / Trans Pressure Control / 1-4 / 2-4 / 4-2 / 4-1 Shift

3 parameters
Manufacturer Name Name
FN42DYTX_VS Trans Tv Pressure 42
FNX42T Xnorm 1-4 2-4 4-2 4-1 Shift 42
FNX42V Ynorm 1-4 2-4 4-2 4-1 Shift 40

Trans Control / Trans Pressure Control / 2-3 / 3-2 Shift

10 parameters
Manufacturer Name Name
FN23TPOT 2-3 Shift Pressure Multiplier Cold
FN32T 3-2 Shift Pressure Multiplier Cold
SCSLP2SD Downshift Slope Into 2
FN23DYTX_VS Trans Tv Pressure 23
FN32DYTX_VS Trans Tv Pressure 32
SCSLP3SU Upshift Slope Into 3
FNX23T Xnorm 2-3 3-2 Shift 43
FNX32T Xnorm 2-3 3-2 Shift 44
FNX23V Ynorm 2-3 3-2 Shift 41
FNX32V Ynorm 2-3 3-2 Shift 42

Trans Control / Trans Pressure Control / 3-4 / 4-3 Shift

10 parameters
Manufacturer Name Name
FN34TPOT 3-4 Shift Pressure Multiplier Cold
FN43T 4-3 Shift Pressure Multiplier Cold
SCSLP3SD Downshift Slope Into 3
FN34DYTX_VS Trans Tv Pressure 34
FN43DYTX_VS Trans Tv Pressure 43
SCSLP4SU Upshift Slope Into 4
FNX34T Xnorm 3-4 4-3 Shift 45
FNX43T Xnorm 3-4 4-3 Shift 46
FNX34V Ynorm 3-4 4-3 Shift 43
FNX43V Ynorm 3-4 4-3 Shift 44

Trans Control / Trans Pressure Control / Manual Shifts

9 parameters
Manufacturer Name Name
FNM12A Added Pressure For Manual 12 Shift
TVBLPM21 Added Pressure For Manual 21 Shift
FNM23A Added Pressure For Manual 23 Shift
TVBLP32 Added Pressure For Manual 32 Shift
TVBLP43 Added Pressure For OD Cancel
FNBLPM21 Duration For Added Pressure On Manual 21
FNBLP32V Duration For Added Pressure On Manual 32
FNBLPM32 Duration For Added Pressure On Manual 32 1
FNBLPM43 Duration For Added Pressure On OD Cancel

Trans Control / Trans Pressure Control / Non-Shifting Pressure

8 parameters
Manufacturer Name Name
TVPMINST_1 Minimum TV Nonshifting 1st
TVPMINST_2 Minimum TV Nonshifting 2nd
TVPMINST_3 Minimum TV Nonshifting 3rd
TVPMINST_4 Minimum TV Nonshifting 4th
SCSLP1 Nonshift Slope 1
SCSLP2 Nonshift Slope 2
SCSLP3 Nonshift Slope 3
SCSLP4 Nonshift Slope 4

Trans Control / Trans Pressure Control / Trans Engagement Pressure

20 parameters
Manufacturer Name Name
FN616F Engagement Curve W/TP Forward
FN616R Engagement Curve W/TP Reverse
FNXTOD Engagement Table Into Forward Gear
FNXTOR Engagement Table Into Reverse Gear
FNPNN Neutral Pressure
FNENGRMP Pressure Ramp For Engagement
FN616_SW Switch To Use Forward Engagement Curve Always
FNTMDRVREV Duration For Drive To Reverse Engagement
FNTMNEUDRV Duration For Neutral To Drive Engagement
FNTMNEUREV Duration For Neutral To Reverse Engagement
FNTMREVDRV Duration For Reverse To Drive Engagement
TMENGACT Duration To Complete Engagement
FNDRTM Duration To Delay D-R Pressure Ramp
FNNDTM Duration To Delay N-D Pressure Ramp
FNNRTM Duration To Delay N-R Pressure Ramp
FNRDTM Duration To Delay R-D Pressure Ramp
FNXTODX Xnorm Engagements 47
FNXTORX Xnorm Engagements 48
FNXTODY Ynorm Engagements 45
FNXTORY Ynorm Engagements 46

Trans Torque Reduction

56 parameters
Manufacturer Name Name
PCTU2A % Reduction For Step 1 Of 12 Shift
PCTU3A % Reduction For Step 1 Of 23 Shift
PCTU4A % Reduction For Step 1 Of 34 Shift
PCTU2B % Reduction For Step 2 Of 12 Shift
PCTU3B % Reduction For Step 2 Of 23 Shift
PCTU4B % Reduction For Step 2 Of 34 Shift
PCTU2C % Reduction For Step 3 Of 12 Shift
PCTU3C % Reduction For Step 3 Of 23 Shift
PCTU4C % Reduction For Step 3 Of 34 Shift
PCTU2D % Reduction For Step 4 Of 12 Shift
PCTU3D % Reduction For Step 4 Of 23 Shift
PCTU4D % Reduction For Step 4 Of 34 Shift
PCTU2E % Reduction For Step 5 Of 12 Shift
PCTU3E % Reduction For Step 5 Of 23 Shift
PCTU4E % Reduction For Step 5 Of 34 Shift
FNTQDM41V Hold Duration For Tq Mod On 41 Downshift
FNTQDM42V Hold Duration For Tq Mod On 42 Downshift
FNTQDM1V Hold Duration For Tq Mod On Downshift To 1st
FNTQDM2V Hold Duration For Tq Mod On Downshift To 2nd
FNTQDM3V Hold Duration For Tq Mod On Downshift To 3rd
FNTQDNWD Max Duration For Tq Mod On Downshift
FNTQUPWD Max Duration For Tq Mod On Upshift
ECT_TQM Min ECT For Engine Torque Reduction On Shifts
TP_MIN_TQ_DN Min Tp For Torque Reduction On Downshifts
TP_MIN_TQM Min Tp For Torque Reduction On Shifts
TP_MIN_TQ_UP Min Tp For Torque Reduction On Upshifts
FNTQDF41V Ramp Duration For Finish Of Tq Mod On 41 Downshift
FNTQDF42V Ramp Duration For Finish Of Tq Mod On 42 Downshift
FNTQDF1V Ramp Duration For Finish Of Tq Mod On Downshift To 1st
FNTQDF2V Ramp Duration For Finish Of Tq Mod On Downshift To 2nd
FNTQDF3V Ramp Duration For Finish Of Tq Mod On Downshift To 3rd
FNTQDS41V Ramp Duration For Strt Of Tq Mod On 41 Downshift
FNTQDS42V Ramp Duration For Strt Of Tq Mod On 42 Downshift
FNTQDS1V Ramp Duration For Strt Of Tq Mod On Downshift To 1st
FNTQDS2V Ramp Duration For Strt Of Tq Mod On Downshift To 2nd
FNTQDS3V Ramp Duration For Strt Of Tq Mod On Downshift To 3rd
FNTMTQDS41 Duration Dly For Strt Of Tq Mod On 41 Downshift
FNTMTQDS42 Duration Dly For Strt Of Tq Mod On 42 Downshift
FNTMTQDS1 Duration Dly For Strt Of Tq Mod On Downshift To 1st
FNTMTQDS2 Duration Dly For Strt Of Tq Mod On Downshift To 2nd
FNTMTQDS3 Duration Dly For Strt Of Tq Mod On Downshift To 3rd
SW_TQM Torque Modulation Switch
FNPCTU2 Torque Reduction 12 Shift
FNPCTD1 Torque Reduction 21 Shift
FNPCTU3 Torque Reduction 23 Shift
FNPCTD2 Torque Reduction 32 Shift
FNPCTU4 Torque Reduction 34 Shift
FNPCTD3 Torque Reduction 43 Shift
FNDLTUF2 Tq Mod End For 12 Shift
FNDLTUF3 Tq Mod End For 23 Shift
FNDLTUF4 Tq Mod End For 34 Shift
FNDLTUS2 Tq Mod Start For 12 Shift
FNDLTUS3 Tq Mod Start For 23 Shift
FNDLTUS4 Tq Mod Start For 34 Shift
FNTQIAN Xnorm Trans Torque Reduction 50
FNTQTPN Ynorm Trans Torque Reduction 50

Transient Fuel Control

13 parameters
Manufacturer Name Name
FILFRC Cylinder Air Charge Ratio Below To Use Deceleration Multiplier
ACDC_TI_LIM Tip In Lead Compensation Limit
ACDC_TO_LIM Tip Out Lead Compensation Limit
FN285 Transient Fueling MULT For IMRC When Closing
FN286 Transient Fueling MULT For IMRC When Opening
FNIMRC_MLT Transient Fuel Multiplier When IMRC Open/closed
FNTFC_X_VT Transient Fuel Temperature Based Fuel That Is Trapped
FNTFC_T_VT Transient Fuel Temperature Based Rate Fuel Leaves Puddle
FNTFC_X Transient Fuel That Is Trapped In Puddle
FN022VT Xnorm Transient Fueling 63
FN022F Xnorm Transient Fueling 61
FN018T Ynorm Transient Fueling 75
FN039T Ynorm Transient Fueling 73

VCT Control

1 parameters
Manufacturer Name Name
CIDTSTLVL Test Level For Code P0340

VID Block

8 parameters
Manufacturer Name Name
RTAXLE_MXCLP Max Axle Ratio For VID Block
RT_AXLE_MX Max Axle Ratio That Is Certified
VID_NOV_MX Max N/V For VID Block
TIRE_REV_MX Max Tire Revs That Is Certified
RTAXLE_MNCLP Min Axle Ratio For VID Block
RT_AXLE_MN Min Axle Ratio That Is Certified
VID_NOV_MN Min N/V For VID Block
TIRE_REV_MN Min Tire Revs That Is Certified

Variable Speed Fan Control

2 parameters
Manufacturer Name Name
FN822B Air Flow Adder Based On Duration On
HSFAN_DELAY Delay Period When Turning On The High VSS Fan
No matching parameters were found.

The public preview intentionally does not display raw addresses, offsets, data sizes, scaling values or other underlying definition information. The complete mapping is included with the purchased definition.

ADDITIONAL EEC-V INFORMATION

Need More Than the Calibration Map?

Additional EEC-V 216K research and platform information can also be made available for projects that require more than the calibration parameters themselves.

Memory Regions

Memory region information and identified areas of the EEC-V 216K PCM memory layout.

Memory Layout

Additional information about how EEC-V 216K binaries are organized and where different types of data are located.

ECU Structure

Additional research into EEC-V 216K architecture, calibration structure and related binary information.

Custom Definitions

Need an XDF, DAMOS, A2L or another finished definition format? Custom definition work is available separately.

Custom requests:
If you need additional EEC-V 216K information, a finished definition, a different file format, memory layout information, or other research data for a specific project, contact Trent's Tuning to discuss what you need.

BEFORE YOU PURCHASE

What You're Actually Getting

This product is a professional calibration definition and research reference for the Ford EEC-V 216K platform. It is not a Ford PCM binary, stock calibration, modified calibration, flashing tool or standalone tuning application.

The delivered definition contains the mapped calibration information needed to identify and work with parameters contained within supported EEC-V 216K files.

The information is intentionally provided in a format that is useful beyond a single tuning application. You can use it to create an XDF, DAMOS, A2L-style definition, WinOLS project or another definition format depending on your workflow.

Each mapped scalar and table has been manually mapped and checked. Extensive research and development has gone into locating, identifying and verifying the calibration information contained in this definition.

Because EEC-V binaries, calibration layouts and strategies can differ, always verify that your specific binary matches a supported strategy before making calibration changes.

Ford EEC-V 216K

Start With Nearly 1,600 Mapped Parameters.

Get the Ford EEC-V 216K calibration definition from Trent's Tuning and start your project with thousands of manually mapped and checked calibration locations already identified.

Buy Definition - $600
This product is provided "AS IS" without warranties of any kind. Trent's Tuning LLC does not guarantee compatibility with every Ford EEC-V 216K binary, strategy, calibration, ECU or software version. Users are responsible for verifying addresses, calibration values, scaling, conversions, data types and generated results before making changes to a vehicle calibration. Custom XDF, DAMOS, A2L-style or other definition formats may be available separately for an additional charge. Additional EEC-V 216K research information, including memory regions, memory layouts and other ECU information, may also be available separately. Trent's Tuning LLC is an independent company and is not affiliated with, endorsed by or sponsored by Ford Motor Company, TunerPro, WinOLS, IDA Pro, Ghidra or any other manufacturer or software developer mentioned on this page. All trademarks are the property of their respective owners.