October 21, 2026 Version 1.0.1.4 Binary Editor - New Strategy Support - Added Binary Editor support for EEC-IV 57K 1995 F-250 460 E4OD LHBLA/DOE0 and EEC-V 112K 1997 F-350 460 ZF-5 AGANN/FQP0. - Scalars, tables, and axes now display correct values for both. Binary Editor - Improvements - Values now display correctly across all supported strategies. - Fixed axis labels showing 1, 2, 3 / Col 1, Col 2 instead of real axis values. - Now works with binaries that include or are missing the bootloader. - Supports split PCM/TCM files, combined or as separate sections. - Added support for ECUs with two calibration/flash regions. - You can now set values slightly above or below the listed range when needed, while still protecting values that would corrupt or damage the ECU. - Fixed the Edit Scalar and Edit Table windows cutting off longer descriptions. File Protection - Updated the .tth file format with stronger protection. - Older files will need to be re-saved in the new format. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- October 20, 2026 Version 1.0.1.3 Major Obfuscation & TTH File Format Overhaul This release brings a complete rewrite of the obfuscation system, introducing a new custom virtualization obfuscation engine designed to make reverse engineering significantly more difficult than traditional obfuscation methods. The .tth file format has also been completely rewritten with improved protection and a stronger overall design, making protected files harder to analyze, reverse engineer, and crack... - Custom Virtualization Obfuscation: Introduced a new custom virtualization engine that transforms protected code into custom bytecode executed by the virtualization system. - Rewritten Obfuscation Engine: Rebuilt the obfuscation system from the ground up for improved protection and a more advanced approach to code obfuscation. - New .tth File Format: Completely redesigned the protected file format with stronger protection mechanisms. - General Improvements: Additional refinements and improvements throughout the protection system. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- October 18, 2026 Version 1.0.1.2 Startup & Compatibility Fixes - Fixed multiple major bugs that were preventing some users from launching the application. - Improved startup reliability and overall application stability. - Added additional compatibility improvements. Windows 11 support is not yet fully tested and confirmed. Obfuscation Improvements - Further improved the custom obfuscation system. - Fixed additional obfuscation-related bugs. - Improved reliability when handling protected and obfuscated content. General Bug Fixes & Improvements - Fixed various bugs reported by users. - Additional stability improvements and optimizations. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- October 16, 2026 Version 1.0.1.1 Ford .VBF & .PHF File Utility's - Added new Ford .VBF and .PHF File Utility Tools. - These tools provide support for working with Ford .VBF and .PHF files. - Obfuscation Fixes - Resolved multiple obfuscation-related issues. - Improved reliability and stability when handling protected or obfuscated content. - User Interface & General - Various bug fixes, stability improvements, and optimizations. - Minor user interface improvements and visual refinements. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- October 7, 2026 Version 1.0.1.0 Binary Editor Strategy Support - Added Binary Editor support for the following strategies: - 2003 F350 6.0, Black Oak 448K, VXAP2N2/TEC7 - 2004 BA Falcon I6, Black Oak 1472K CAN, HAANFHZ/A3HD - 2006 F550 V10, Spanish Oak 1024K, TAZP6U6/UBH0 - 2014 Mustang GT 5.0L, Copperhead 2048K, FPFD2B5/DHW1 Request Strategy/Catch Code - Added a new Request Strategy/Catch Code page for submitting requests for any strategy or catch code, not just checksum correction. - Requests can now be made for Binary Editor support, Read/Write Flashing, and Checksum Correction from one place. User Interface & General - Various bug fixes, stability improvements, and optimizations. - Minor user interface improvements and visual refinements. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- October 7, 2026 Version 1.0.0.9 Automatic Updates - Added a new automatic update system for Trent's Tuning Hub. - The application can now automatically detect when a newer version is available. - New updates can now be downloaded and installed directly through the application. - No longer requires manually downloading each new version from the Trent's Tuning website. - Simplified the update process so future releases can be installed directly from the application. - Improved update handling and version detection to help ensure customers are running the latest available release. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- October 6, 2026 Version 1.0.0.8 Added IPC/PPC Checksum Correction support for requested strategies: - 2003 Ford F350 6.0, Black Oak 448K, VXAP2N2/TEC7 - 2004 Ford BA Falcon I6, Black Oak 1472K CAN, HAANFHZ/A3HD - 2006 Ford F550 V10, Spanish Oak 1024K, TAZP6U6/UBH0 - 2014 Ford Mustang GT 5.0L, Copperhead 2048K, FPFD2B5/DHW1 Checksum Correction Improvements - Fixed an issue with strategies where IPC and PPC checksums protect overlapping areas of the file. - Checksums are now corrected in the proper dependency order, supporting multiple overlapping checksum regions. - Improved final verification to recalculate every checksum against the completed file before it can be saved. - Checksum correction is now fully all or nothing. If verification fails, the original file is restored with no partial changes. - Added additional protection to verify that only intended checksum values were modified. - Files and strategies that do not match the selected ECU configuration are now rejected instead of being silently skipped. - Saved files are read back and verified against the final corrected file. Binary Editor - Added Binary Editor support for select Black Oak strategies while testing and development continues. - Additional strategies will be added as testing is completed. Black Oak 1472K CAN Read/Write Flashing - Added Read and Write Flashing support for Black Oak 1472K CAN. - Currently supports the OBDX Pro FT device ONLY. - Flashing support is still under active testing and development. User Interface & General - Minor user interface improvements and visual refinements. - Various bug fixes, stability improvements, and optimizations. More Strategy Support Coming - As Black Oak 1472K CAN flashing and Binary Editor support continue to be tested, additional strategies will be added. - Once support is ready, customers will be able to submit requests to have their specific strategy/vehicle added for Read/Write Flashing and full Binary Editor support. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- September 12, 2026 Version 1.0.0.7 User Interface - Fixed an issue where the main application window could not be moved by clicking and dragging the top title bar. Ford IPC/PPC Checksum Correction - Added Ford IPC/PPC Checksum Correction for validating and correcting checksums on supported Ford ECU calibration binaries. - Supports both PPC and IPC checksum channels, covering strategies that protect their calibration with a single combined checksum spanning multiple memory regions as well as strategies that use several independent checksum channels at once. - Resolves each protected memory region dynamically from the ECUs own internal addressing rather than relying on fixed, one size fits all offsets, allowing the same correction logic to correctly adapt across different calibration layouts within a shared ECU strategy. - Includes ECU specific address translation handling to accurately map internal ECU addressing to real file locations, with dedicated logic covering a wide range of binary memory layouts across different ECU hardware generations. - Performs a full post correction verification pass, independently recomputing every checksum channel against the corrected binary to confirm internal consistency before a file is reported safe. - Automatically and safely identifies and excludes any regions that fail to resolve cleanly (due to a mismatched file, unsupported variant, etc.) rather than guessing or partially processing a binary. - Generates a clear, detailed correction report for every channel processed, showing what was already correct, what was recalculated, and final verification status. - Ford ECU types and strategy/catch codes with out of the box support at launch: - PTEC 1024K: JBAT5/VAB1, JAAT4/CSI0, JEAT3/IUK1, JEAU1/CFL1, JECE5/MDV0, JECE6/AFK1, PWAP9A4/DSA8 - Black Oak 448K: VXAM7/DAX1, VXAM7NW/FFM9, VXAM7NW/EVR0, VXAM7N2/BKG6, VXAM7R5/MAT6, VXAM7P2/FUJ0 - Black Oak 1472K SCP: UJAGAZ3/RLA1, UJAGA51/RLA2, UJAHAZ2/RLA3, UJAHAK3/RLA4, UJAHAS4/RLA5, UJAHAS5/RLA6, UJAHAS3/YRF0 - Black Oak 1472K CAN: RXAP7A7/ABC7, RXAP7B6/BME7, RXAQ1B4/EAY2, RXAQ1C3/FTF2, RXAQ1R5/SCD2 - Spanish Oak 1024K: FBBS2B2/DUR3, FBJR0G4/CDC1, FBCE0BZ/MCY0, FMAF0A4/JYH1, FMAN0BB/SHK1 - Green Oak 1536K: RXDE4DX/EDB2, RXDG5BA/VYR4, RXDG3N3/MRV3, RXDG3A2/UFU4, RXDG4A2/JFV5 - Green Oak 2368K: DMJKB52/TVU1, DMJKBL5/TVU2, RXGE6/URZ0 - Silver Oak 1024K: ICDR154/HXT0, IEAJ0F3/TYZ0, JSAK4LA/GJG1 - Copperhead 2048K: KTCR2C5/NGW6, KTCP3C9/WME4, FSDM554/SJY2, FSDN053/XYH0 - Don't see your ECU type or strategy/catch code above? Use the new Request Missing Strategy/Catch Code page to submit a request! ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- September 8, 2026 Version 1.0.0.6 User Interface - Completely overhauled and redesigned the entire user interface. - Increased the overall size of the application to 1400x800. - Redesigned the layout to make tools, utilities, and features easier to navigate. - Reworked menus, buttons, panels, controls, and navigation elements. - Improved spacing, sizing, alignment, and organization throughout the application. - Updated the overall design with a cleaner and more modern appearance. - Updated visual styling and consistency across the application. - Improved overall usability and responsiveness. - Added numerous additional UI design improvements and visual refinements. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- September 8, 2026 Version 1.0.0.5 EEC-V Checksum Utility - Added new utility to calculate and correct checksums for EEC-V binaries. - Supports 88K, 112K, and 216K EEC-V binary sizes. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- August 2, 2026 Version 1.0.0.4 General - Optimizations and bug fixes. - Improved stability and consistency across different platforms. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- July 26, 2026 Version 1.0.0.3 General - Optimizations and bug fixes. - Improved stability and consistency across different platforms. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- July 19, 2026 Version 1.0.0.2 Website & Updates - Added new page https://trentstuning.com/Hub.html - All updates can be downloaded from the website. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- August 13, 2026 Version 1.0.0.1 Bug Fixes & Improvements Modern Numeric Up/Down - Fixed an issue where typed values would not update until Enter was pressed or the control lost focus. - Values now update instantly while typing. - Improved value synchronization and event handling. Modern 1D Map - Fixed an issue where rows added, removed, or updated through code would not immediately appear in the map. - Map data now refreshes automatically when changes are made programmatically. - Fixed an issue where cell value changes made through code would not update visually until the control was hovered over. - Improved redraw and refresh behavior for smoother operation. Map Formatting - Fixed decimal values being displayed without trailing zeros. - Added configurable decimal precision support. - Improved readability of calibration data. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- August 10, 2026 Version 1.0.0.0 Fuel Utility - Added AFR/Lambda conversion tools with real-time calculations. - Added fuel correction calculator for tuning adjustments. - Added built-in stoichiometric presets for: - Pump Gasoline - Ethanol Blends (E05-E100) - Methanol - Nitromethane - Propane - Natural Gas - Diesel Transmission Utility - Added WOT Shift RPM and OSS calculations for: - Ford 6R80 - Ford 6R140 - Ford 10R80 - Dodge A580 - Dodge 65RFE - Dodge 8HP70 - Dodge 8HP90 Fuel Utility Injector Data - Added Ford Racing 24 lb/hr (AA302) injector data. - Included: - High Slope - Low Slope - Breakpoint - Minimum Pulse Width - Pressure Compensation Data User Interface - Added custom dark mode interface. - Added custom modern controls and styling. - Added rounded UI elements and animations. - Improved DPI scaling and display compatibility. - Optimized startup and navigation experience.